暗記メーカー

暗記メーカー

​
ログイン
M7c13
10問 • 2ヶ月前
  • ユーザ名非公開
    • 通報

    問題一覧

  • 1

    Check for broken wires …………………… as serious laceration can occur. Broken wires are indicated where the cloth gets caught on the cable. Broken wires which lay flat can be difficult to detect.

    Rub a cloth (rag) along the length of the cable in both directions, do not use bare hands

  • 2

    HTS aircraft control cable are protected from corrosion

    be Galvanizing

  • 3

    After swaging an end fitting onto a control cable, a visual inspection for cracks and distortion is performed and then the cable is proof loaded to

    50% of the minimum breaking loud for British specification cables and 60% for American specification cables.

  • 4

    A control cable is proof loaded to ensure

    the end fitting on the cable are secure

  • 5

    A typical modern tensiometer is the Pacific T5 tensiometer It has a set of risers. The tensiometer chart identifies which riser is to be used with each cable size

    Fit the correct riser and correct chart to the tensiometer.

  • 6

    Checking for cable tension for

    looking for full and free movement

  • 7

    Swaging of cable end fitting is checked by

    using a go no go gauge on the barrel.

  • 8

    wet arc tracking is a fault caused

    by insulation damage

  • 9

    A cable should be replaced when individual wires

    are worn greater than 40%

  • 10

    The check for a cable pulling out of a swaged fitting is by looking for

    a shiny surface on the cable near the fitting

    • module 1 ch1

    module 1 ch1

    ユーザ名非公開 · 53問 · 11ヶ月前

    module 1 ch1

    module 1 ch1

    53問 • 11ヶ月前
    ユーザ名非公開

    m1

    m1

    ユーザ名非公開 · 68問 · 11ヶ月前

    m1

    m1

    68問 • 11ヶ月前
    ユーザ名非公開

    m1

    m1

    ユーザ名非公開 · 68問 · 11ヶ月前

    m1

    m1

    68問 • 11ヶ月前
    ユーザ名非公開

    m4

    m4

    ユーザ名非公開 · 12問 · 6ヶ月前

    m4

    m4

    12問 • 6ヶ月前
    ユーザ名非公開

    m4 ch 2

    m4 ch 2

    ユーザ名非公開 · 12問 · 6ヶ月前

    m4 ch 2

    m4 ch 2

    12問 • 6ヶ月前
    ユーザ名非公開

    m4 ch 3

    m4 ch 3

    ユーザ名非公開 · 18問 · 6ヶ月前

    m4 ch 3

    m4 ch 3

    18問 • 6ヶ月前
    ユーザ名非公開

    m 4 ch 4

    m 4 ch 4

    ユーザ名非公開 · 12問 · 6ヶ月前

    m 4 ch 4

    m 4 ch 4

    12問 • 6ヶ月前
    ユーザ名非公開

    M15c1

    M15c1

    ユーザ名非公開 · 15問 · 2ヶ月前

    M15c1

    M15c1

    15問 • 2ヶ月前
    ユーザ名非公開

    M15c2

    M15c2

    ユーザ名非公開 · 15問 · 2ヶ月前

    M15c2

    M15c2

    15問 • 2ヶ月前
    ユーザ名非公開

    M15c3

    M15c3

    ユーザ名非公開 · 10問 · 2ヶ月前

    M15c3

    M15c3

    10問 • 2ヶ月前
    ユーザ名非公開

    M15c4

    M15c4

    ユーザ名非公開 · 22問 · 2ヶ月前

    M15c4

    M15c4

    22問 • 2ヶ月前
    ユーザ名非公開

    M15c3

    M15c3

    ユーザ名非公開 · 10問 · 2ヶ月前

    M15c3

    M15c3

    10問 • 2ヶ月前
    ユーザ名非公開

    M15c4

    M15c4

    ユーザ名非公開 · 22問 · 2ヶ月前

    M15c4

    M15c4

    22問 • 2ヶ月前
    ユーザ名非公開

    M15c5

    M15c5

    ユーザ名非公開 · 19問 · 2ヶ月前

    M15c5

    M15c5

    19問 • 2ヶ月前
    ユーザ名非公開

    M15c6

    M15c6

    ユーザ名非公開 · 20問 · 2ヶ月前

    M15c6

    M15c6

    20問 • 2ヶ月前
    ユーザ名非公開

    M7c1

    M7c1

    ユーザ名非公開 · 18問 · 2ヶ月前

    M7c1

    M7c1

    18問 • 2ヶ月前
    ユーザ名非公開

    M7c2

    M7c2

    ユーザ名非公開 · 11問 · 2ヶ月前

    M7c2

    M7c2

    11問 • 2ヶ月前
    ユーザ名非公開

    M7c3

    M7c3

    ユーザ名非公開 · 39問 · 2ヶ月前

    M7c3

    M7c3

    39問 • 2ヶ月前
    ユーザ名非公開

    M7c3

    M7c3

    ユーザ名非公開 · 39問 · 2ヶ月前

    M7c3

    M7c3

    39問 • 2ヶ月前
    ユーザ名非公開

    M7c4

    M7c4

    ユーザ名非公開 · 21問 · 2ヶ月前

    M7c4

    M7c4

    21問 • 2ヶ月前
    ユーザ名非公開

    問題一覧

  • 1

    Check for broken wires …………………… as serious laceration can occur. Broken wires are indicated where the cloth gets caught on the cable. Broken wires which lay flat can be difficult to detect.

    Rub a cloth (rag) along the length of the cable in both directions, do not use bare hands

  • 2

    HTS aircraft control cable are protected from corrosion

    be Galvanizing

  • 3

    After swaging an end fitting onto a control cable, a visual inspection for cracks and distortion is performed and then the cable is proof loaded to

    50% of the minimum breaking loud for British specification cables and 60% for American specification cables.

  • 4

    A control cable is proof loaded to ensure

    the end fitting on the cable are secure

  • 5

    A typical modern tensiometer is the Pacific T5 tensiometer It has a set of risers. The tensiometer chart identifies which riser is to be used with each cable size

    Fit the correct riser and correct chart to the tensiometer.

  • 6

    Checking for cable tension for

    looking for full and free movement

  • 7

    Swaging of cable end fitting is checked by

    using a go no go gauge on the barrel.

  • 8

    wet arc tracking is a fault caused

    by insulation damage

  • 9

    A cable should be replaced when individual wires

    are worn greater than 40%

  • 10

    The check for a cable pulling out of a swaged fitting is by looking for

    a shiny surface on the cable near the fitting