問題一覧
1
Hazard means
A station or thing that has the potential to harm a person
2
Risk means
The possibility harm might occur when exposed to a hazard
3
Control means
eliminate hazard and reduce the risks
4
Employer take to ensure the WHS
Provide and maintain a work environment, Provide and maintain forklift and racking, Provide and maintain safe systems of work
5
If you are required to work closer than the minimum safe distances, what are two way you can do this?
Get permit, Use of a spotter
6
How do you know what the voltage of the electric lines are? What is the best method?
Refer to the authority
7
If your forklift comes into contact with electric power lines what should you do immediately?
Warn others to stay away, Break contact if safe to do so, Stay in the machine if safe to do so, Report it, Machine checked before reuse
8
On your forklift why is 'rear end' swing dangerous
Hit the people and structure
9
Why is it important to consult with the relevant workplace personnel and WHS officers before commencing work on a site?
To identify hazards and controls
10
When should hazard risk controls be applied?
Before starting work
11
If you required to work closer than the minimum safe distances, what are two ways you can do this?
Get permit, Use of a spotter
12
Where can you find information to install an attachment correctly?
manufacturer's instructions
13
How can the load capacity be effeted when adding an attachment?
Reduced the capacity
14
What three operational checks should you carry out after starting you forklift
Steering, Lights, Brakes
15
What are two things you should do, if your view is partially obstructed by the load when operating a forklift
Reserve operation, Repacking
16
Why are you not allowed to raise or lower load near or over people?
If that drop the load, there is risk of injury or death
17
Are you allowed to carry passengers on a forklift truck?
Only designed to do so
18
Why is there an increase risk when moving loads in a raised high position?
Reduce the stability of forklift & load may tip over
19
Why should you not carry a load on one tyne?
Damage to fork tyne, Reduced the stability and may tip over
20
Name minimum of 3 forklift attachments except fork tynes
Drum carrier, Work box, Slippers
21
When stacking loads one on top of other, waht three things must you consider
Stacked on a firm level surface, Bottom one can support above, Heavy goods at the bottom
22
Before shifting a load what would be placed over the gap between a truck and a loading dock?
Secure dock plate, Secure bridge plate
23
How can you find the rated load capacity for a forklift and it's attachment?
Data plate
24
How is the forklift effected when using a jib attachment?
Reduced the capacity and load swing
25
What is the effect of the load not being hard up against the heel of the fork arms?
Reduces the capacity and stability of forklift
26
Why would you take the key out of the forklift when leaving in unattended?
To prevent unauthorised use
27
What are two control measures you could apply for protecting other vehicles and equipment including personnel on site
Flag person, Warning signs
28
What are 4(four) visual indicators for defects on the wheels and tyres
Tyre: Uneven wear, Tyre: Flat tyre, Wheels: Missing bolts, Wheels: Crack or bend
29
What three operational checks should you carry out after starting you forklift
Steering, Lights, Brakes
30
What are two things you should do, if your view is partially obstructed by the load when operating a forklift
Reserve operation, Repacking