問題一覧
1
What hazard lassification code is the left arrow pointing to ?
in classification
2
Which type of licence is granted to storage of explosives in a SE section?
MOD F1659 Authorised Quantity Explosive License
3
What are the 9 UN classifications of hazardous materials?
explosives gases flammable liquids flammable solids oxidising toxic radioactive corrosives miscellaneous
4
What would the significance of a red hazard band around a store indicate ?
incendiary
5
During a 15 week visual inspection of a sig kit 16mm within flying clothing. What must not be removed from the case / pouch ?
the mini flare cartridges
6
What colour flares are sig kit pyro 16mm be identified
red green and white
7
Give examples of prohibited articles in this list
magnets
8
What does this supplementary fire symbol mean ?
in the event of a fire a radiological hazard may exist
9
What hazard lassification code is the right arrow pointing to ?
compatibility group
10
What action is to be taken if the closure disc of an ADU cartridge is found to be perforated
do not use, reject and report to your supervisor
11
What does this fire symbol mean?
mass fire hazard
12
When should the stack card (RAF Form 957) be adjusted?
immediately on removal or insertion of an article
13
Which end of an SDDN can be identified by tactile ribs on the body for use in low light
flare
14
Give a brief explanation of comparability group s
if involved in a fire / accident, initially any reaction will be contained within its container
15
What does the term NEQ (net explosive quantity) refer to ?
the actual weight of explosives Kgs inside an article container or building
16
What does this supplementary fire symbol mean ?
in the event of a fire wear protective suite (corrosive fumes)
17
What does this fire sign mean ?
mass explosion hazard
18
When examining maches waterproof saftey, you note the marking have been worn away. Your actions would be to?
report to supervisor. when instructed check and remark with a spirit based marker
19
When is an inspection of an ADU cartridge required ?
on initial issue and every bay maintenance
20
You are visually inspecting pyros when a thunderstorm risk is declared. list your actions.
work to an appropriate stop point. make safe any safety devices, return to container or host SE, secure and evacuate.
21
What are the limitations regarding pyrotechnics within licenced flying clothing and survival equipment sections?
visual inspection only and fitting /removal from parent SE
22
In designed use what fires the ALIU squib ?
water activated battery
23
What does this fire sign mean ?
no significant hazard
24
What stencilled information on an ACA (Ammunition container assembly) gives the generic contents information?
the proper shipping name
25
Define the term explosion
A nuclear, chemical or mechanical process leading to a sudden release of energy
26
What does this fire sign mean?
projection hazard
27
Other than the nomenclature and quantity. What other information is usually marked on a store/container by the manufacturer to identify batch?
maker, date and LOT
28
Name part A of the pistol pyrotechnic L1A1
barrel
29
On initiation what is the built in delay inn my an ADU cartridge
4 seconds
30
How would you return a fired pyrotechnic device
segregate and return to the ESA for CFFE process
31
What would a middle brown hazard indicate on a store ?
low explosive
32
Give a brief explanation of compatibility groups
they decide which explosives that can be safely mixed during storage and transport
33
Name part D of the pistol pyrotechnic L1A1
spring
34
During inspection within a licenced process building. What must be used to remove a sig kit pyro 16mm cartridge from its plastic pouch?
a labelled pistol with the firing pin removed
35
What hazard lassification code is the middle arrow pointing to ?
hazard division
36
Name part B of the pistol pyrotechnic L1A1
piston
37
How can the colour within a sig kit pyro 16mm be identified?
closure disc colour case stencilled with nomenclature and colour tactile case markings for low light use
38
Name part C of the pistol pyrotechnic L1A1
end cap
39
Which form would give you a list of authorised processes and tools ?
MOD Form 1660 Articles in use (Technical)
40
How must a part emptied ACA be marked
with the word fraction in white lettering
41
What would the overall role colour Oxford blue indicate on a store?
drill inert
42
What would the overall role colour deep saxe blue indicate on a store ?
practice
43
What definitive classification of explosives can produce light, smoke, heat and infa red radiation when initiated?
pyrotechnics
44
What is always the underlying principle when deciding how much explosives should be stored within a licenced potential explosive site (PES)
as low as reasonably practicable ALARP
45
When handling an ALIU squib what 3 safety points should you observe?point explosive output
point explosive output away from hands eyes body and others. keep shorting plug on except when fitting as per process. do not touch the plug contacts / pins
46
What would the significance of a golden yellow hazard band around a store indicate ?
high explosive
47
What action should be taken if a SDDN is suspected of having loose components
do not use, reject and report to your supervisor
48
How do you check signal distress day and night (SDDN) for loose internal components
lightly shake the SDDN and listen for rattle / movement
49
What stencilled information on an ACA (Ammunition container assembly) gives the specific contents information?
nomenclature
50
What external factors can accidentally initiate an EED
radio and radar emissions stray voltage and static electricity
51
What does this supplementary fire symbol mean ?
in the event of a fire wear self contained breathing
52
What protects an ALIU squib from HERO (rad haz)?
two RF filters in the two-pin plug housing and sheafed cable
53
What does this supplementary fire symbol mean
in the event of fire do not use water
54
Who can fit / remove an ADU cartridge from the ADU?
authorised weapons tradesperson