問題一覧
1
What does the 48 VDC power on the VSAT-S?
HPA
2
What are the dish sizes of each SAT system?
vsat-s 1.2m, vsat-m 1.8m, vsat-l 2.4m
3
What is the purpose of the CV-MCU2?
serial or Ethernet to fiber
4
When initially setting up your MRI, and the MRT is ZEROIZED, the user must put the modem on ________ when not using encryption.
bypass
5
What is the address of the website used to access the CBM-400/E GUI for the MRT?
10.10.1.3
6
To Console into the NCM on the AMRT, the website address you must use is
10.10.1.4
7
What is the protocol you are supposed to use when consoling into SECUREFX to extract bootfiles?
SCP
8
How many bands can the VSAI-S operate in?
2
9
What does a SOLID RED ZERIOIZED light indicate, is encryption BYPASSED Or ENABLED?
Enabled
10
what are the 4 types of bursts
traffic aquisition reference control
11
what is the size of the MCWS-X dish?
96cm
12
What is the AMRT NMS gui website
10.10.1.4:30000
13
Where in the VSAT-L do you ground the MRT?
any bare metal
14
What software do you utilize to create the encryption keys for the CBM-400 /e
SecureCRT
15
Which terminal out of the VSAT FAMILY cannot support a MRT?
VSAT-S
16
A SOLID SAT light on the CBM-400/E indicates that you are
receiving and transmitting
17
What does a solid amber BYPASS light indicate?
bypassed
18
5 Components on VSAT-S
modem, hpa, m&c, rmr, acu
19
What is the command to send a CW? Show an example.
CW -p -25 -f 1234567890 -t 999
20
When conducting an IF loopback, the -30 Attenuator adapter must be connected on the ____ side of the IF loop Coaxial cable.
Tx
21
Prior to conducting any active mission operations, it is recommended to do a _________ to ensure all the components are operational.
LTI
22
What does the 24 VDC Power on the VSAT-S?
ACU
23
What are the two ways you can console into the CBM- 400/e modems utilizing SecureCRT?
SSH2 and SERIAL
24
The CBM-400/e has the capability of ______ and ________ encryption.
paraphrase and transec
25
For a SERIAL SecureCRT session to console into a modem, what should the BAUD RATE be?
115200
26
What are the TX and RX Local Oscillators for KU band?
12.8 and 10, 10.75, 11.25
27
The terminal ID for the MRT is 0x ____. The Terminal ID for the AMRI is 0x ____.
120 and 140
28
What component on the ATLAS powers the TLNB and HPA?
DCIU
29
You are attempting to console into the CBM-400/e modem via SecureCRT for the AMRT. For this session, you decide to use ssh2 as the protocol. The hostname will be ________ and the username will be _____
10.10.1.4 and root
30
You are attempting to create a console session in SecureCRT for your CB-400/e MRT modem. In order to do so, the session requires to select a COM port. How do you find/know which COM port to utilize?
device manager
31
on the VSAT-S, the 24v powers the _____
ACU
32
Where do you connect the MRT into the VSAT-L?
Rack 1 MRT