SEAM 4 FINALS

60問 • 1年前

問題一覧

It is a tanker designed to carry oil or alternatively solid bulk cargo

Combination Carrier

Suppose you handle a cargo, what appears on the outer packaging of the dangerous goods when they are being transported as a warning to all those working within the transport chain?

hazard warning label

This term refers to a cargo space which is constructed with at least two vertical or sloping, longitudinal, grain-tight divisions which are coincident with the hatch side girders or are so positioned as to limit the effect of any transverse shift of grain.

especially suitable compartment

In what chapter states the entry of sea water into the foremost hold and the subsequent collapse of the watertight bulkhead between the two foremost holds, creating a domino effect throughout the vessel, causing her to founder?

Chapter XII

What shall be issued for every ship loaded in accordance with the regulations of the IMSBC Code either by the Administration or an organization recognized by it or by a Contracting Government on behalf of the Administration?

Document of Authorization

In loading cargoes, there are group consisting of cargoes which are neither liable to liquefy nor possess chemical hazards. Which group do they belong? Group D Group B Group A Group C

What is the term used for the purposes of calculating the grain heeling moment caused by a shift of grain, means the volume per unit weight of the cargo as attested by the loading facility, i.e. no allowance shall be made for lost space when the cargo space is nominally filled? specific gravity stability stowage factor water density

As you load cargoes, you must also make sure that cargoes are properly distributed throughout the ship's holds to provide adequate ______ and ensure that the ship's structure is never overstressed. stability cargo distribution stowage plan loading plan

The document of authorization shall accompany or be incorporated into the grain loading manual provided to enable the master to meet the requirements of ____. A8 A5 A7 A6

CTU Marking will principally consist of the display of the UN Number on large loads in excess of ____. gross weight. 6000 kg 4000 kg 8000 kg 2000 kg

Which of the following IMO Resolutions contains recommendations for entering enclosed space aboard ships? Res. A.1050(27) Res. A 1051(28) Res. A.1051 (27) Res. A.1050(28)

Where can you find the IMDG Code which contains clearly defined recommendation for the training of all staff who handle or process dangerous goods shipments for transportation by sea? Volume 1, Chapter 1.1 Volume 2, Chapter 1.3 Volume 1, Chapter 1.2 Volume 1, Chapter 1.3

Which of the following characteristics of any ship carrying bulk grain must be met throughout the voyage, at least the three criteria of angle of heel not more than 12º, angle of flooding not less than 0.075 meter- radians, and GM after correction for free surface effects of liquids in tanks shall not be less than 0.30 m relating to the heeling moments due to grain shift? Statical stability Dynamic stability Heeling moment Intact stability

What code should also be consulted for additional requirements regarding the stowage and segregation of packaged dangerous goods? IMDG Code Grain Code IGC Code IMSBC Code

What uniquely identifies dangerous goods to enable rapid and precise identification during transport and to ensure the correct handling, stowage, segregation and the like? Label Placard NA number UN Number and PSN

What is presented across 2 pages of the IMDG Code and is divided into 18 columns for each individual dangerous goods listed? Port Information Cargo List Dangerous Goods List Cargo Declaration List

Associated with each UN number is a ______, which encodes the general hazard class and subdivision (and, in the case of explosives, their compatibility group). ID Number NA Number Hazard Identifier UN Number and PSN

In what particular group consist of the cargoes which may liquefy if shipped with moisture content exceeding their transportable limit as categorize cargoes in IMSBC Code? Group B Group C Group A Group D

Which of the following substances are liable either to cause death or serious injury or to harm human health if swallowed, inhaled or by skin contact? toxic substances corrosive substances flammable substance hazardous substance

What MSC/Circ. Number contains the uniform method of measurement of the density of bulk cargoes? MSC/Circ. 908 MSC/Circ. 905 MSC/Circ. 907 MSC/Circ. 906

In which of the following the requirement for minimum stability in terms of initial meta centric height, angle of heel due to assume grain shift and residual dynamic stability were included? International Grain Code IBC Code IMDG Code IMSBC Code

The term filled compartment, untrimmed, refers to a cargo space which is filled to the maximum extent possible in what way of the hatch opening but which has not been trimmed outside the periphery of the hatch opening either by the provisions of _____ for all ships. A 10.3.1 A 10.2.1 A 10.4.1 A 10.5.1

What class of dangerous goods that the reason for regulation are dangerous goods present a wide array of potential hazards to human health and safety, infrastructure and/or their means of transport. Class 6 Class 9 Class 5 Class 7

Marking and Labeling Requirements of the IMDG Code Markings and labeling are the subjects of ______ of Volume 1 of the IMDG Code. Chapter 5.1 Chapter 5.4 Chapter 5.2 Chapter 5.3

To which class of dangerous goods, posing serious hazards due to their volatility, combustibility, and potential in causing or propagating severe conflagrations, does the regulation apply? Class 2 Class 4 Class 1 Class 3

What is required as a proof in certifying that a container or vehicle has been properly packed and secured if loaded with dangerous goods? Declaration List Packing Certificate Dangerous Goods List Cargo List

In which group do cargoes possessing a chemical hazard, which could give rise to a dangerous situation on a ship belongs? Group C Group B Group A Group A and B

In what MSC/Circ. Number contains the lists of solid bulk cargoes for which a fixed gas fire- extinguishing system may be exempted? MSC/Circ. 1146 MSC/Circ. 1147 MSC/Circ. 1144 MSC/Circ. 1145

What code ensures safety mainly by stipulating the packaging required and segregation from other cargoes which there could be an adverse reaction? IGC Code IMSBC Code IMDG code IBC Code

Dangerous goods fall in different divisions. In what division of Class 6 Dangerous Goods do infectious substances are classified that are known or can be reasonably expected to contain pathogens? Division 6.5 Division 6.4 Division 6.2 Division 6.3

What will provide the information required for labelling hazardous substances and dangerous goods procedures? Cargo list dangerous good list MSDS Declaration list

The main legislation governing safe carriage of solid bulk cargoes is the International Maritime Solid Bulk Cargoes (IMSBC) Code, which became mandatory on ______ under the SOLAS Convention. January 1, 2012 January 1, 2009 January 1, 2011 January 1, 2010

Which of the following type of cargo may create flammable atmospheres, heat spontaneously, deplete oxygen concentration and corrode metal structures? coal organic material metal concentrate Iron ore

If the UN Number is not given but the dangerous good has the PSN, its associated UN Number can be located by looking at the ______ alphabetical index at the back of the of the IMDG Code. Supplement Volume 2 Volume 1 Volume 1 and 2

Existing ships not having on board a document of authorization issued in accordance with A 3 of the International Grain Code may apply what provisions without limitation on the deadweight which may be used for the carriage of bulk grain? provisions of A9 provisions of A6 provisions of A7 provisions of AB

In testing the dangerous goods according to UN test procedures, a shipper is able to classify dangerous goods according to _____ hazard classes. 3 9 1 6

It is a code used to extract all necessary information for the safe carriage in bulk of a stated cargo, and describe how it should be loaded and list in any special precautions or requirements to be observed during loading, carriage and discharge. IMO SOLAS IMSBC Code IMDG Code

Where can you find the associated plans and all of the information necessary to check that a proposed loading plan complies with a stability requirements of the regulations at all stages of the voyage. Grain Loading Stability Data International Grain Code Grain Loading Stability Booklet Loading/Discharging Plan Sequence

The method of verifying that the loading of the vessel supplied with a _______ meets stability requirement using volumetric heeling moments, cargo details and maximum deadweight heeling moments. Loading Stability Booklet Document of Authorization Material Data Sheet Document of Compliance

Which of the following are substances identified in the IMDG Code Index or substances that satisfy the GHS classification criteria for Hazardous to Aquatic Environment Acute 1, Chronic 1, or Chronic 2. marine pollutants toxic substance hazardous substance oxidizers

A copy of such a document, _____ and associated plans shall be placed on board in order that the master, if so required, shall produce them for the inspection of the Contracting of the port of loading. Grain Loading Stability Booklet Loading/Discharging Plan Sequence Grain Loading Stability Data International Grain Code

What bulk carrier isused to distinguish bulkers from bulk liquid carriers such as oil, chemical, or liquefied petroleum gas carriers? Combination carrier Dry bulk carrier Gen. Cargo carrier OBO carrier

The initial metacentric height, after correction for the free surface effects of liquids in tanks, shall be not less than _____. 0.40 m 0.10 m 0.30 m 0.20 m

Checking the cargo schedule, individual cargoes are listed in 'schedules' which are contained in _______ of the Code. Appendix 4 Appendix 1 Appendix 3 Appendix 2

Information in printed booklet form shall be provided to enable the master to ensure that the ship complies with the IMSBC Code when carrying grain in bulk on an international voyage which is listed in _____. A 6.1 and A 6.2 A 6.1 and A 6.3 A 6.2 and A 6.4 A 6.2 and A 6.3

Shifting boards shall have a thickness of not less than _______ necessary supported by uprights. and shall be fitted grain-tight and where 40 mm 20 mm 50 mm 30 mm

The purpose of using a _______ is to identify dangerous goods is to enhance safety by overcoming language barriers. labelling four-digit number UN Number PSN number

It is the shipper's responsibility to provide the Master with valid ______ about the cargo's physical and chemical properties. up to date information dangerous good declaration cargo declaration dangerous good list

What BC.1/Circ. Number contains contact names and addresses of the offices of designated national competent authorities responsible for the safe carriage of grain and solid bulk cargoes? BC.1/Circ.62 BC.1/Circ, 66 BC.1/Circ. 68 BC.1/Circ. 64

In what division of Class 1 Dangerous Goods includes the very insensitive substances which have a mass explosion hazard? Division 1.2 Division 1.5 Division 1.3 Division 1.4

What do you call a third type of identification number used for hazardous substances that is associated with proper shipping names recognized by the ICAO Technical Instructions? ID Number Hazard identifier label number NA Number

What office or organization at the port of loading can give the master a certificate stating the characteristics of the cargo and the required conditions for carriage and handling? port state control officers port authority Competent authority classification society

These are defined by dangerous goods regulations as substances which may cause or contribute to combustion, generally by yielding oxygen as a result of a redox chemical reaction. oxidizers toxic substance flammable solids corrosive substance

Which of the following codes was replaced by the IMSBC Code? IMDG Code IGC Code IMSBC Code BC code

What document must your ship have to carry dangerous goods in solid form in bulk? Dangerous Goods List Document of Compliance Stowage Plan Cargo Declaration

Which of the following refers to any cargo space wherein the bulk grain is not loaded in the manner prescribed in A. 2.2 or A 2.3? especially suitable compartment filled compartment untrimmed filled compartment trimmed partly filled compartment

The term filled compartment, ______ refers to any cargo space in which, after loading and trimming as required under A 10.2, the bulk grain is at its highest possible level. untrimmed partly filled full trimmed

The angle of heel due to the shift of grain shall not be greater than ______ or in the case of ships constructed on or after 1 January 1994 the angle at which the deck edge is immersed, whichever is the lesser. 14 degree 16 degree 06 degree 12 degree

The master should ensure that he receives from the shipper of the intended cargo details of the nature of the cargo required by ____ of SOLAS 1974, as amended. Chapter VI Chapter VIII Chapter VII Chapter V

This Code applies to ships regardless of size, including those of less than 500 tons gross tonnage, engaged in the carriage of grain in bulk, to which part C of _____ of the 1974 SOLAS Convention, as amended, applies. Chapter VII Chapter V Chapter IV Chapter VI

MARPOWER

BARQUE 19. LAURENTE, FRANK NATHANIEL C. · 60問 · 1年前

MARPOWER