State in stress in a material:stress failure

Highest Ordinate in Stress-Strain diagram

An Appreciable elongation or yielding of the material without any corresponding increase of load.

What do you call the retarding force acting opposite a body in motionWhat do you call the retarding force acting opposite a body in motion

It is the displacement of one level relative to the level above or below B

Occurs when the center of mass and rigidity do not coincide

If the structure is subjected to a cycle of stresses and it causes the beam to have sudden ultimate Stucture

It is measured by the Richter scale

It is measured by a seismometer

besides the epicenter, it describes the location of the earthquake

Identify the material property described by the following material: The composite material exhibits elastic properties in one direction different from that in the perpendicular direction.

Identify the material property described by the following material: The material has the same composition at every point but the elastic may not be the same in all directions.

Liquefaction is best decribed

Which refers to the rigidty of a structure

Identify the following: It is the point through which the resultant of the resistance to the applied lateral force acts

Identify the following : It is the point through which the applied Seismic Force acts

Identify the following : It refers to Flexibility of a Structure

One in which the lateral stiffness is less than 70% of the stiffness of the story above is called

lateral displacement of one level relative of the level above or below is calledlateral displacement of one level relative of the level above or below is called

Identify the following : it is the point through which the resultant of the resistance to the applied force acts

Identify the following : it is the distance between the center of rigidity and center of mass

Which material property is referred to by the following: The material has the ability to absorb energy in the Plastic Range

Which material property is referred to by the following : The material has the ability to absorb energy in the Elastic Range

Which material property is referred to by the following: The material has the ability to defuse the Plastic Range without Breaking

Which of the following is measured by seismometer

Identify the Property of the material described by the following : The material deforms considerably even with a slight increase in stress

Identify the Property of the material described by the following: The material regains its original dimensions When the load is removed.Identify the Property of the material described by the following: The material regains its original dimensions When the load is removed.

Which of the following refers to the flexibility of a structure ?

Which material property is described by the following: The composite material exhibits elastic properties in one direction Different from that in the perpendicular direction.

Which material property is described by the following: The material has the same composition at every point But the elastic properties may not be the same in all direction.

Which material property is described by the following: The material has the same elastic properties in all directions

What behavlor of an engineering material is described by the following : The material retums to its original shape When the load Is removed.

What behavior of an engineering material is described by the following : The material deforms considerably Even with a slight Increase in stress.

Which material has the same compression at any point ?

What is the term which refers to the ability of a material to defor in the plastic range without breaking

What do you call the ability of a material to absorb energy in the plastic range

Which terms refers to the property of a material which makes it retum to its original dimension when the load is removed ?

Which terms refers to the property of a material To absorb energy in the Elastic Range ?

Which of the following terns is described herein 7 Stressing high strength steel wires before concrete hardens

Which of the following terms is described herein? Stressing high strength and steel after concrete has been cast and has attained sufficient strength

Which of the following terms is described herein? Loss of stress that takes place with the passage of time as concrete is held at a constant, strain.

What do you call the retarding force acting opposite a body in motion

Which structural member has the ratio of its unsupported height to its least lateral dimension of not less than 3 and is used primarily to support Axial Load

What do you call the force which determines whether the body will be in equilibrium or will have a varying state of motion.

Identify the principle used in equations related to the deformation of axially loaded materials: That the stress is proportional to the strain within the Elastic Region,

Identify the principle used in equations related to the deformation of axially loaded materiais : That in the deformation of axially loaded members, the ratio of the lateral to the longitudinal strain is constant

Identify the principle used in equations related to the deformation of axially loaded materials: That within the elastic range, it is the constant of proportionality that defines the linear relationship between stress and strain.

Hich terms refers to force body at rest

Which terms refers to the force generated by a body in motion ?

What is the term for the value beyond which the stress is no longer proportional to the strain.

Materials which have the same composition at any point are described as

Which property of a material enables it to under large permanent strains before failure

Materials which have the same composition at any point are described as