Removal, installation, and repair of landing gear tires in PCAR 5.1.1.2 is?

A certificate or rating issued to an approved maintenance organization is valid for how many year/s from the date of issuance subject to compliance with the AMO procedure manual?

Disassembly of a crankcase or crankshaft of a reciprocating engine equipped with an integral supercharger is an example of (Part IS.5.1.1.2)

The contracting state on whose register is entered.

A document signed by an authorized representative of an Approved Maintenance Organization (AMO) in respect to an inspection, repair, or modification on a complete aircraft, engine, or propeller after it has received maintenance performed (Part IS: 5.1.1.2)

All Philippine registered aircraft used in general aviation shall be re- weighed

Modification of the basic design not made in accordance with the recommendations of the appliance manufacturer or in accordance with applicable airworthiness directives is considered as (Part IS: 5.1.1.2)

Owners or operators of airplane over 5,700 kg and helicopters over 3,175 maximum take-off weight shall report to the Authority and to the organization responsible for the aircraft type design any failure, malfunction, or defect be made within

A holder of an AMT license desiring to renew must accomplish and submit the requirements within how many days prior to the expiry of his/her license?

Replacing defective safety wiring or cotter pins is

Installation of an accessory that is not approved for the engine is an example of

No person may assign, nor shall any person perform maintenance functions for aircraft unless that person had a minimum rest period of how many hours prior to beginning of duty?

What is classified as a major repair?

The installation or removal of equipment of equal or less weight and in the same location as the last listed as optional equipment in the aircraft specifications is

Calibration and repair of instruments is an example of (Part IS: 5.1.1.2)?

Who is responsible for ensuring that all aircraft maintenance records are kept up to date?

A special flight permit may be issued for an aircraft that may not currently meet applicable airworthiness requirements but is capable of a safe flight for the purposes of (PCAR 5.4.1.4)

The Approved Maintenance Organization (AMO) shall relieve the person performing maintenance functions from all duties for 24 hours after working for

All Philippine registered aircraft used for commercial or aeriał work operations shall be re-weighed

Special repair to structural engine parts by welding, plating, metalizing, or other methods is an example of (Part IS: 5.5.1.2)

The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, when it has been disassembled, cleaned, inspected as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limiits.

No person or entity, other than the Authority, may apprOve an aircraft, airframe, aircraft engine, propeller, appiance, or component part for return to service after it has undergone maintenance, preventive maintenance, rebuilding, or modification, except as provided in the following

A certification confirming that the maintenance work to which it relates has been complied with in accordarce with the applicable standards of airworthiness using approved data.

Change to the hub design is?

An experimental certificate for research and development, showing compliance with regulations, crew training, or market survey, after the date of issue or renewal uniess the authority prescribes a shorter period, are effective for how many year/s?

In compliance with the recent experience requirements, a licensed AMT may not exercise the privileges of his/her license or rating unless he/she served as an AMT under his/her license and rating for at least 6 months within the preceding

When overhauling electrical equipment, all necessary information should be obtained from

Where Would find the recommended statement for recording the approval or disapproval for return to service of an aircraft after a 100-hour or annual inspection?

Rewinding the field coil of an elecirical accessory is an example of?

The alteration of an aircraft or aeronautical product in conformity with an approved standard is called

Replacing any cowling not requiring removal of the propeller or disconnection of flight controls is considered

The AMO shall relieve the person performing maintenance functions from all duties for how many consecutive hours during any 7 consecutive day period?

Simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operation is known as

Removal of accessories that are listed as required equipment on the aircraft or engine specification is an example of

Fabrjcation performed in the wing main ribs and compression members is a (1S: 5.1.1.2)

Which part of Philippine Civil Aviation Regulation prescribes the requiremients for certification of an aircraft and aeronautical components for continuing airworthiness?

What is the regulatory definition of preventive maintenance?

The Contracting State which approved the original type certificate and any subsequent supplemental type certificates for an aircraft, or which approved the design of an aeronautical product or appliance.

Who is responsible for ensuring that all maintenance required to be carried out in the hangar plus any defect rectification carried out during base maintenance, is carried out to specified design and quality standards?

Which is considered to be typical preventive maintenance operations (Part IS 5.1.1.2)

Who js responsible for maintaining an aircraft's airworthy condition including compliance with all airworthiness directives? (PCAR 5.3.1.2)

Changes to the basic design of the fuel or oil system is considered

An applicant for an AMT license and any associated rating shall be at least

The state that has jurisdiction over the organization responsible for the final assembly of the aircraft engine

How long does a holder of a certificate issued under 14 CFR Part 65 have to notify the authority after any change in permanent mailing address?

Calibration of avionics or computer equipment is an example of?

If an aircraft is not approved for return to service after an annual inspection and it needs to fly to another location to perform a modification,

In situations involving unscheduled aircraft unserviceability, persons performing maintenance functions for aircraft may be continued on duty for

Refinishing decorative coating of fuselage, wings, tail surfaces group (excluding balanced control surfaces), fairings, cowling, landing gear, cabin, or cockpit interior when removai or disassembly of any primary structure or operating system is not required is

Conversions of any sort for the purpose of using fuel of a rating or grade other than that listed in the engine specifications is (Part IS 5.1.1.2)

An Aviation Maintenance Technician or Specialist who seeks reinstatement of his/her license that has already expired for 24 months from expiration date shall

An applicant for an AMT Iicense for Powerpłant and Airframe ratings relying solely on practicąl experience shall provide documentary evidence of

Any maintenance operation requiring the opening of cold and hot sections of a turbine is considered

Replacing or cleaning spark plugs and setting of spark plug gap IS clearance is considered as? (Part 5.1.12)

A permanent record of every maintenance (not including preventive maintenance) repair of building or alterations on any airframe, powerplant, propeller, or appliance shall be maintained by

Standard certificate of airworthiness directives, special certificate of airworthiness directives, and certificate of airworthiness issued for restricted or limited category aircraft, as long as the maintenance, preventive maintenance and alterations are performed, are effective for how many year/s?

An example of powerplant major repair is

Who is authorized to repair an aircraft instrument?

Following unscheduled duty periods, the person performing maintenance functions for an aircraft shall have mandatory rest period of

No person may schedule a personnel to performa maintenance task on an aircraft for more than how many consecutive hours of duty?

Who is responsible for maintaining the aircraft from unairworthy condition?

The owner of an aircraft or, in the cạse ofa leased aircraft, the lessee, shait be responsible for maintaining the aircraft in an airworthy condition