Bharat Skill Sem1 [Test 5]

50問 • 3年前

問題一覧

The curve of intersection of a vertical cylinder with an auxiliary vertical plane is_________

A straight line

When a vertical cylinder is penetrated ( प्रवेश, घुसले ) by a horizontal cylinder, the top view of the intersection is___________

Circular curve

When two prisms are intersected at right angle, the intersection is made up of___________

Straight line

When a cylinder penetrates into a vertical cone with their axes parallel to each other, the top view of the intersection is___________ (जेव्हा सिलिंडर एका उभ्या शंकूमध्ये त्यांच्या अक्षांसह एकमेकांना समांतर आत प्रवेश करतो, तेव्हा शीर्षस्थानी छेदनबिंदूचे दृश्य ___________ आहे)

A circle

The line of intersection between cylinder an cone, unless they envelop a common sphere is made up of___________

Curved line

When a solid completely penetrate another solids there will be two lines of intersection. These lines are called as________

Lines of interpenetration

If a plane cuts a cone at an angle and it cuts all the generators, then the conic curve is called as_________

Ellipse

Two surface planes intersect in a ______ line

Straight

A cylinder is placed on H.P. on its base and section plane is parallel to H.P., then the section of solid gives _____

Circle

Which of the following is the purpose of using cutting (or) section plane line?

Direction of cutting objects

When the plane cuts a cone at an angle to the axis of the cone, then section is formed _____

Hyperbola

When two cylinder of equal diameters envelop a sphere the curve of intersection is made up of______

Semi circle

Name of the intersection of solids shown in the figure

Intersection of cylinder and cylinder

The points at which the curve of intersection changes its nature are known as__________ (ज्या बिंदूंवर छेदनबिंदूचे वक्र त्याचे स्वरूप बदलते त्यांना __________ म्हणतात)

Key points

What is name of given object?

Ellipse

What is angle of isometric view?

30°

Name the drawing which is very much preferred by machine shop?(मशीन शॉपमध्ये जास्त पसंत असलेल्या ड्रॉइंगचे नाव सांगा?)

Multiview drawing

What is the shape of isometric circle?

Elliptical shape

In which method the isometric view is drawn assuming the object is enclosed in a rectangular solid frame ? (आयताकृती घन चौकटीत वस्तू बंदिस्त आहे असे गृहीत धरून आयसोमेट्रिक दृश्य कोणत्या पद्धतीमध्ये काढले जाते?)

Box method

What is the angle of three mutually perpendicular edges of an isometric cube to shown in Fig?

120°

What is name of object an shown in figure?

Hexagonal prism

What is name of object as shown in figure?

Cube

What is name of object as shown in figure?

Sphere

What is name of object as shown in figure?

Cone

What is name of object as shown in figure?

Cylinder

Which drawing curved features of the component are drawn to true shape?

Oblique drawing

Which drawing projection are oblique (inclined) to the plane of projection?

Oblique

What is the name of pictorial drawing?

Oblique

Which factor is required to convert isometric length from true length of object in isometric projection?

0.82

What is included angle of pentagon?

108°

In which method non isometric lines are suited for isometric view of an object consisting of number of planes at different angles?

Offset method

In which method of orthographic projection the object is placed below H.P. and behind V.P. ?

3rd angle projection

In the orthographic projection, rays are assumed to _______

be parallel

In third angle projection the top view (or) plan is drawn _______

above the front view

When plan of an object lies below the elevation the projection is known as_________

First angle projection

In the perspective projection the height from which the viewer sees the scene is known as_________

Eye level

To draw the orthographic projection, visual rays are _________ to the projection plane

Perpendicular

Orthographic projection is also known as _______

Multi view projection

Which plane is suitable for the projections in isometric view are?

Perpendicular to plane

In perspective projection, the horizontal plane where the object is assumed to be situated is known as________

Ground plane

The point from the observer is assumed to view the object in perspective projection, is called _____

Centre of projection

Which plane is required to show the front view of an object?

Vertical plane

How many dimensions are minimum required from the isometric view to draw each view in orthographic projection ?

Two dimensions

When a plane is perpendicular to a reference plane, its projection on that plane is a _________

Straight line

The planes are formed when any three________ points are joined

Non-collinear

When the three faces make unequal angles between the axes then the projection is known as________

Trimetric

The point at which parallel lines appear to converge together in perspective view is called_________ (दृष्टीकोनातून ज्या बिंदूवर समांतर रेषा एकत्र येतात त्या बिंदूला _________ म्हणतात.)

Vanishing point

What are the three principal planes in orthographic projection?[ऑर्थोग्राफिक प्रोजेक्शनमध्ये तीन प्रमुख planes कोणती आहेत?]

Frontal, horizontal, profile

T square helps to draw.......

Horizontal and parallel lines

Which size of standard drawing board designated by D3?

500 × 350 × 15

es test 2

Sudhanshu Shravane · 50問 · 2年前

es test 2