02_画像なし択一
問題一覧
1
Cisco Expressway-C and Expressway-E
2
Cisco Meeting Server
3
transcoder
4
Drop Ad Hoc Conference
5
Wait 24 hours for the garbage collector to remove the user.
6
Active Directory
7
Add a Phone NTP Reference to the Date/Time Group.
8
Database replication is not synchronized on the Unified CM nodes.
9
Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phone device does not have a DN configured.
10
option 66
11
1
12
any node
13
incorrect clock source
14
Confirm the phone load name in the phone configuration.
15
The In-Room Control Editor on the webpage of the MX800
16
disconnects all users that had been failed over, and the users must log in again
17
80 ms round trip
18
in the Called Party Transformation Pattern Configuration section, configure the Pattern as 9.011841234567 configure the Discard Digits as Predot
19
Service Parameter Configuration
20
xStatus Video Output
21
Backups should be scheduled during off-peak hours to avoid system performance issues.
22
annunciator
23
15 seconds
24
MRA
25
Cisco CallManager SNMP
26
configure the hardware transcoder on the hub location router
27
restart of the network service
28
Cisco UCM Group
29
SNMPv3
30
20 years
31
Cisco DirSync
32
Device(config-if)# switchport voice vlan 221
33
remote disk on the SFTP server
34
trunk
35
LDAP Directory user fields
36
Voice policy
37
SIP trunk
38
Wait until 3:15 a.m. on March 6 for garbage collection to remove the user from Cisco UCM. th
39
Add the FQDN or hostname of the device.
40
Intercluster Lookup Service
41
SEP003096D2D5CB.cnf.xml
42
Dialed Number Analyzer
43
It provides access to on-premises Cisco Unified Communications infrastructure for remote endpoints.
44
The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061: HTTPS: TCP 8443; XMPP: TCP 5222; Media: UDP 36002 to 59999.
45
Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM
46
DNS
47
digest user
48
Change the phone security profile.
49
87.2 kbps
50
iLBC
51
G.729
52
In CUCM Service Parameters set "Opus Codec Enabled" to "Enabled for all Devices Except Recording-Enabled Devices".
53
Configure pass-thru content sdp on the voice service.
54
G.711ulaw
55
E.164
56
dtmf-relay sip-kpml
57
Enable Auto-Registration
58
150
ENARSI_J_1_#1-#183
ENARSI_J_1_#1-#183
斎藤友一 · 3回閲覧 · 100問 · 2年前ENARSI_J_1_#1-#183
ENARSI_J_1_#1-#183
3回閲覧 • 100問 • 2年前ENARSI_J_1_#185-#397
ENARSI_J_1_#185-#397
斎藤友一 · 100問 · 2年前ENARSI_J_1_#185-#397
ENARSI_J_1_#185-#397
100問 • 2年前ENARSI_J_1_#399-#568
ENARSI_J_1_#399-#568
斎藤友一 · 109問 · 1年前ENARSI_J_1_#399-#568
ENARSI_J_1_#399-#568
109問 • 1年前ENARSI_J_2_#35-#543
ENARSI_J_2_#35-#543
斎藤友一 · 68問 · 2年前ENARSI_J_2_#35-#543
ENARSI_J_2_#35-#543
68問 • 2年前ENARSI_J_4_#4-#335
ENARSI_J_4_#4-#335
斎藤友一 · 100問 · 2年前ENARSI_J_4_#4-#335
ENARSI_J_4_#4-#335
100問 • 2年前ENARSI_J_4_#338-#539
ENARSI_J_4_#338-#539
斎藤友一 · 65問 · 2年前ENARSI_J_4_#338-#539
ENARSI_J_4_#338-#539
65問 • 2年前ENARSI_J_3_DRAG&DROP_#10-#463
ENARSI_J_3_DRAG&DROP_#10-#463
斎藤友一 · 20問 · 1年前ENARSI_J_3_DRAG&DROP_#10-#463
ENARSI_J_3_DRAG&DROP_#10-#463
20問 • 1年前ENARSI_J_1_#1-#568
ENARSI_J_1_#1-#568
斎藤友一 · 309問 · 1年前ENARSI_J_1_#1-#568
ENARSI_J_1_#1-#568
309問 • 1年前ENARSI_J_4_#338-#539
ENARSI_J_4_#338-#539
斎藤友一 · 165問 · 1年前ENARSI_J_4_#338-#539
ENARSI_J_4_#338-#539
165問 • 1年前ENSLD_1_画像択一
ENSLD_1_画像択一
斎藤友一 · 61問 · 1年前ENSLD_1_画像択一
ENSLD_1_画像択一
61問 • 1年前ENSLD_2_複数選択
ENSLD_2_複数選択
斎藤友一 · 62問 · 1年前ENSLD_2_複数選択
ENSLD_2_複数選択
62問 • 1年前ENSLD_3_ドラッグ&ドロップ
ENSLD_3_ドラッグ&ドロップ
斎藤友一 · 17問 · 1年前ENSLD_3_ドラッグ&ドロップ
ENSLD_3_ドラッグ&ドロップ
17問 • 1年前ENSLD_4_文章択一
ENSLD_4_文章択一
斎藤友一 · 166問 · 1年前ENSLD_4_文章択一
ENSLD_4_文章択一
166問 • 1年前01_画像あり択一
01_画像あり択一
斎藤友一 · 16問 · 1年前01_画像あり択一
01_画像あり択一
16問 • 1年前03_複数選択
03_複数選択
斎藤友一 · 25問 · 1年前03_複数選択
03_複数選択
25問 • 1年前500-710: Video infrastructure implementation
500-710: Video infrastructure implementation
斎藤友一 · 94問 · 1年前500-710: Video infrastructure implementation
500-710: Video infrastructure implementation
94問 • 1年前300-435 ENAUTO : Automating Cisco Enterprise Solutions
300-435 ENAUTO : Automating Cisco Enterprise Solutions
斎藤友一 · 110問 · 1年前300-435 ENAUTO : Automating Cisco Enterprise Solutions
300-435 ENAUTO : Automating Cisco Enterprise Solutions
110問 • 1年前問題一覧
1
Cisco Expressway-C and Expressway-E
2
Cisco Meeting Server
3
transcoder
4
Drop Ad Hoc Conference
5
Wait 24 hours for the garbage collector to remove the user.
6
Active Directory
7
Add a Phone NTP Reference to the Date/Time Group.
8
Database replication is not synchronized on the Unified CM nodes.
9
Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phone device does not have a DN configured.
10
option 66
11
1
12
any node
13
incorrect clock source
14
Confirm the phone load name in the phone configuration.
15
The In-Room Control Editor on the webpage of the MX800
16
disconnects all users that had been failed over, and the users must log in again
17
80 ms round trip
18
in the Called Party Transformation Pattern Configuration section, configure the Pattern as 9.011841234567 configure the Discard Digits as Predot
19
Service Parameter Configuration
20
xStatus Video Output
21
Backups should be scheduled during off-peak hours to avoid system performance issues.
22
annunciator
23
15 seconds
24
MRA
25
Cisco CallManager SNMP
26
configure the hardware transcoder on the hub location router
27
restart of the network service
28
Cisco UCM Group
29
SNMPv3
30
20 years
31
Cisco DirSync
32
Device(config-if)# switchport voice vlan 221
33
remote disk on the SFTP server
34
trunk
35
LDAP Directory user fields
36
Voice policy
37
SIP trunk
38
Wait until 3:15 a.m. on March 6 for garbage collection to remove the user from Cisco UCM. th
39
Add the FQDN or hostname of the device.
40
Intercluster Lookup Service
41
SEP003096D2D5CB.cnf.xml
42
Dialed Number Analyzer
43
It provides access to on-premises Cisco Unified Communications infrastructure for remote endpoints.
44
The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061: HTTPS: TCP 8443; XMPP: TCP 5222; Media: UDP 36002 to 59999.
45
Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM
46
DNS
47
digest user
48
Change the phone security profile.
49
87.2 kbps
50
iLBC
51
G.729
52
In CUCM Service Parameters set "Opus Codec Enabled" to "Enabled for all Devices Except Recording-Enabled Devices".
53
Configure pass-thru content sdp on the voice service.
54
G.711ulaw
55
E.164
56
dtmf-relay sip-kpml
57
Enable Auto-Registration
58
150