AFMAN stating hazardous condition

How big is the canopy circular assembly of the ACEII

what suspension lines hold the cutter pockets

Where are the cutter lanyards located

How long is the mortar

The pilot chute assembly has a ______ nominal diameter

Sea water is defined as water with a minimum of _______ micro ohms per centimeter

the reefing line cutter incorporates a _____ delay

The pilot chute is attached to the container with a ____ bridle

Flip up Pitot modification was incorporated into parachute containers to make present ACES II seat systems compatible with new and future remember equipment changes.

UWARS units are designed to operate within _____ after being immersed in sea water

What color are UWARS training units painted

With commander approval how long may a parachute packing table be

All references to left and right hand sides are in relation to what

Canopy shall lay flat on packing table with ______ on bottom and ______ on top

which grouping of suspension lines shall be in the left hand group of a packing table

Which aircraft use canopy release links 015-10945-7

which aircraft use canopy release links 81118-10

Canopy release yokes are tightened to _______

SEAWARS electric package assembly screws are torqued to ____

What is the intent of the riser release pin tacking

Reefing line cutters are _____

when installing a new reefing line how much weight should the line be tensioned to

what is the overall length of the under tension new reefing line

where on the new reefing line will the marks to indicate overlap

where is it indicated on the new reefing line with it passes through each cutter

how long is the splice on a reefing line

What color mark is made at the center of the reefing line (83 inches)

Hand tack cover over reefing line cutter with one turn single of ____

what is the length of the mortar locking loop

TOMAs Are responsible for managing the configuration of TOs and providing users with accurate reliable and timely data

Establishes policies and responsibilities for the implementation of a FPD

Provide instruction for the operation and maintenance of AF military systems

In the event of a conflict between a special military system or end time TO and a general TO

nonspecific weapons system waivers request will be submitted using

waiver requests will be a valuated by

waiver requests will be dispositioned by

approval/disapproval of waiver request should be returned within ___ of submission, unless further review is necessary

Applies to computer equipment that connects directly to a weapon system or computer equipment used to support but does not connect to the weapon system

contains information when sanitizing, purging, discarding and destroying removable media used with weapon systems And test/maintenance equipment

may Direct retention of O&M TOs on board operational aircraft

provisions of north Atlantic Treaty organization standardization agreement, central Treaty organization and air standardization coordinating committee require that ___________ And aircraft weight and balance handbooks, will be carried on cargo type aircraft to facilitate loading operations during international combined operations

libraries will be removed from aircraft sent to program depot maintenance, and will be kept current by the TODO/TODA at home station. Libraries remeaning on board aircraft arriving at depot will be created and shipped back to Home station

unless otherwise specified, _______ is the waiver authority for provisions to 11-301v1

waiver requests for 11-30- will be submitted using

only AFEOs, AFE Superintendents and AFE contracting Officer Representatives can contact respective MAJCOM staffs

HAF and MAJCOM messages are directive and must be complied with

MAJCOM staff will review messages for relevancy ___ and will make every effort to merge guidance

a NIPRNet account is required for AFEO/AFE to respond to MAJCOM correspondence

Each AFE section will prepare and submit an annual budget to their

AFE sections will prepare and submit an annual ACBRN forecast to their MAJCOM no later than

AFE programs will establish their own supply accounts for both home and deployed operations

When ordering time change items use ___ to by pass base level stock

Use advice code ____ to ensure assets received from depot have the most service life remaining in item

AFE programs will establish their own supply account for both home station and deployed operation IAW

Notify ____ of excess equipment prior to turn in for redistribution

AFE may possess and maintain one spare set of equipment per __ aircraft possessed

Unless authorized by UTC, any DPAS reportable items contained within stair sets will be considered readiness code _

Additional 10 percent spares will be applied to mobility equipment requirments

the additional 10 percent spare authorization is calculated against the total Basid of Issue Calculation

DPAS reportable items for mobility are considered readiness code.

The host AFE will manage and account for all DPAS reportable items

once access within AFe has been identified disposition will occur within __ calendar days

the first ____ in the chain of command may waive the 7 level requirement down to minimum rank of SrA

AFE performing any flight line maintanance with tooks will develop a dispatch able flight line CTk per

TOs will be filed and maintained IAW

policies, procedures and responsibilities for product quality deficiency report and exhibit handling and processing are outlined in ___

units will comply with ______ when developing unit OIs

AFE facilities will be maintained IAW

maintanance instruction

intermediate with PBG, image intensifier set, night vision, type AN/ACS-9

emergency personnel recovery parachute (chest,back, seat style and torso harness)

all equipment/shop stock/supplies will be considered serviceable unless otherwise marked with repairable/unserviceable tags

installation commanders will designate controlled areas and storage facilities IAW

AFE sections storing firearms will ensure facilities are maintained IAW

risk management

explosive safety standards

afe sections storing firearms will ensure facilities are maintained per

afe personnel performing armory or clearing barrel attendant duties will follow requirements outline IAW

physiological incidents and reporting procedures are governed under

units will notify the owning MAJCOM AFE staff of any physiological incident and provide current update

units will maintain a copy of completed physiological incident response checklist for

___ will document procedures for the control and management of all took used for aircraft equipment maintenance or which enter the flight line

as a minimum until will conduct and document _____ inventory

at a minimum, individuals issued equipment will mark down

mark/identifying each shop rag with a CTK number is

the flight CC/SUPT will designate CTk custodians

____ will determine the type, size, contents and numbers of CtKs required for their work centers

Missing, removed and or broken tools will be documented in TCMax If they cannot be replaced immediately

all and any tools are authorized on the flight line

For deployment purposes, insure equipment, tools and hazmat items are properly identified, prepared, and documented IaW

units are required to electronically back up TCMax at least

if TCMax is not available units will use ____ for accountability and control of CtKs

CTk custodians will ensure all tools are inspected IAW ____

CTK tools will be clearly marked with

required for each CTK

tools sets placed within a CTK will be identified on the CTK MIL by total number of items in set

In addition to normal CTK identification, the titanium engine blade blending kits will be marked