A unique non-changeable number set at the factory identifies each radio

transmissions are automatically tag with identification number and encrypted using ___ Unique to each radio

the ___ Along with a callsign, enables the rescue center to collect isolated personal report data and other vital background information for the isolated personnel

Referred to as the mission key

to use the ___ Communication must be initiated by the rescue Forces an accepted by the radio operator

the CSEL is able to maintain volatile memory for ___ once the capacitor is fully charged

Will result in zeroization of primary TEK, GPS keys, waypoints, all free text messages and

allows a user to continue to use the radio

password entry attempts are allowed each time the radio is turned on. After ___ Failed password attempts a state zeroization is performed on the radio is powered down

The radio is powered by a main battery pack, when new and under nominal operating conditions, provides approximately __ hours of operation

and extended mission mode provides memory retention and low accuracy clock for GPS acquisition for approximately ___ days

what is the color of the cells for LPU-9

for life raft storage the shelves should be ___ from the wall and __ from the floor

at the ___ inspection cycle, life rafts shall be subject to a functional test

low profile life raft without a canopy

this life raft contains ballast bags/water pocket, inflation floor and canopy

The inside panel of the ___ Canopy is orange/blue

this life raft has an orange spray shield with a small viewing port

torque coupling nut on LRU-16 to a value of ___

the ___ Flotation assembly outer wall is constructed of urethane coated nylon

a ____ On Flotation equipment in service or in storage I’ll be perform for mildew whenever weather or other conditions warrant

all Flotation equipment received from supply shall have a ___ Prior to performing any other type of inspection

_____ Shall consist of a screening and periodic inspection and a functional test and shall be performed on all Flotation equipment receipt from supply, another activity or from the manufacture

Cylinders having an outside diameter of 2 inches or less in a length of less than 2 feet are exempt from hydrostatic test

flotation equipment which fails to meet inspection criteria shall be condemned in accordance with ___

all flotation equipment utilized for training purposes should be marked “ for training only “ in ___ for life rafts and ___ for life preservers

Do unit may authorize the installation/location of additional survival items and accessories through their operational instructions and supplements

Life preserver data

preposition life-support flight equipment

MA-1 and MA-2 sea rescue cat

Survival kit record

Life raft/container inspection

Life preserver inspection record

Notice certification avoid when seal is broken

at the Third inspection cycle, life for us shall be subject to a functional test, except the LRU-1 and F-2b liferafts

Will be functionally tested only when the attached inflation assembly is due a hydrostatic test

Measures 22” x 6” and is constructed of .125 inch mild steel

LPU cell protector Will be Fabricated from condemned life preserver material

Weighs 3.9 pounds and provides a minimum of 60 pounds buoyancy

The LPU-38 is not for use and aircraft which do not have ejection seat systems

all equipment utilized for training purposes should be marked “ for training use only “ in ___ For life preservers

If there is any duplication/repetition of information noted on equipment/procedures within Flotation technical orders submit

is equippped with FLU-9autonatic/manual inflation assembly

the LPU-38 automatic inflation assembly may be operated in the manual mode an unlimited number of times without affecting the one time automatic capability

the LPU-38 automatic inflation is a backup to the manual inflation

when the LPU-38 is being used temporarily the adjustment straps should be secured with the elastic keepers or two turns of masking tape

preferred method of detecting leaks

all markings in CO2 cylinders of ___ in height will be bad scribed using permanent pigmented waterproof ink pen

the threaded portion of the CO2 cylinder neck shall contain a minimum of ___ full threads

life preserver shall fully inflate to design shape, without evidence of restriction in less than __

leakage test can be performed with carbon dioxide gas in life preserver

damage may occur to oral inflation valve if air supply pressure entering life preserver exceeds ___

when performing LPU-38 leakage test inflate bladder to proper pressure of ___ PSI

after inflating LPU-38 to 3.25 pounds force per PsI allow to stabilize for a minimum of ___

when leak testing LPU-38 after a minimum of 1 hour bladder pressure should not decrease to less than ___, for a max pressure of 3.25 psi

when cleaning LPU prepare solution of detergent consisting of __ of detergent per gallon of water

once LPU-38 is inspected the date and activity performing the inspection and testing will be stenciled or stamped using ____ waterproof ink

when stenciling on the bladder of the LPU-38 lettering shall be no less than __ and no more than ___ in height

for LPU-38 verify automatic inflator battery voltage is ___ volts direct current or greater

on the LPU-38 cover plate in position and secure Philips head screws, torque cover plate to ___ in pounds

for LPU-38 place cover plate in position and secure Allen head screws, torque to ___ in pounds

on the LPU – 38 attach the cylindrical pull handle lanyard to the inflator level using a ___

for the LPU – 38 place cap nut on left hand manifold valve and torque cap nut to manifold valve to ___ in pounds

for the LPU-38 top side folding procedures, full top edge down to form a fold approximately ___ in wide

on the LPU – 38 when closing the exterior covers stop zipping approximately____ Inches from the bottom right

on the LPU-38 when installing make aside release buckle torque screw to ___ in pounds

on the LPU-38 when installing the female realize buckle torque screws to ___ in pounds

the CSELs gaining unit will register the radios into the JSETS database before issuing

check ___ to ensure the radio holds two or three segments of GPS keys

check at least every __ months or so to ensure the CSEL has valid TEK

zeroize CSEL before shipping back for repairs

torque CSEL antenna screw to __ in oz

a CSEL non rechargeable battery with less than __ will be removed from service

all CSEL batteries are marked will a manufacture stat code in the format ___

a portable universal battery charger use for rapid charging of various types of field equipment batteries

preferred adapter to interface all models of the CSEL rechargeable battery to the SPC

when charging CSEL batteries the LED light will___ when done

ensure CSEL batteries are fully charged every __ months

rechargeable CsEL batteries lose about __ capacity per month when stored at room temperature

no rechargeable batteries retain approximately __ capacity after 5 years at room temperature

LPU-38 TO

tack through elastic keepers of LPU-38 using one turn, double waxed __

two independent inflatable assemblies(bladders), each with an inflation assembly. The bladders are packed inside a black cloth inflation shell assembly. two straps adjusted by a buckle, which snaps around the wearers chest to keep in position when worn

FLU-9 TO

LPU-38 TO

LRU-1/, F-2B, 25 man life rafts, LPU-3, LPU-6, LPU-10 TO