(1)Propellers are Not included in the Airworthiness Directive system. (2) A certificated powerplant mechanic may make a minor repair on an aluminum propeller and approve for return to service.

(1) The Federal aviation regulations require approval after compliance with the data of a supplemental type certificate (2) an installation of an item manufactured in accordance with the technical standard order system requires no further approval for installation in a particalr aircraft regarding the above statements,

Type certificate data sheets are issued for which of the following products?

Where are technical descriptions of certificated propellers found

(1) Manufacturer's data and FAA publications such as Airworthiness directives, type certificate data sheets, and advisory circulars are all approved data (2)FA publications such as technical standard orders, Airworthiness directives, type certificate data sheet, and aircraft specifications and supplemental type certificates are all approved data Regarding the above statements,

The following is table if airspeed limits as given in an FAA-issued aircraft specification: Normal-exceed speed 293 knots maximum landing gear operation speed 174 knots. Maximum flap extended speed 139 knots The high end of the white arc on the airspeed instrument would be at

Which regulation provides the Airworthiness standards for an airplane certificated in the normal category?

Placards required on an aircraft are specified in

Aviation maintenance alerts (formerly General aviation Airworthiness alerts)

What is the maintenance record responsibility of the person who complies with an Airworthiness directive?

Primary responsibility for compliance with Airworthiness directives lies with the

A technical standard order (TSO) is issued by whom?

Check trust bearing nuts for tightness on new or newly overhauled engines at the first 50-hr inspection following installation. Subsequent inspections on thrust bearing nuts will be made at each third 50-hr inspection. From the above statement, at what intervals should you check the thrust bearing nut for tightness?

A complete detailed inspection and adjustment of the valve mechanism will be made at the first 25 hrs after the engine has been placed in service. Subsequent inspection of the valve mechanism will be made each 50-hr period. From the above statement, at what intervals will valve mechanism inspections be performed?

How long are AD compliance records required to be kept?

What does the type certificate data designation code '2 PCSM' mean?

Suitability for the use of a specific propeller with a particular engine-airplane combination can be determined by reference to what information source?

An aircraft type certificate data sheet contains.

The air transport association of America (ATA) specification No. 100 (1) establishes a standard for the presentation of technical data in maintenance manuals (2) divides the aircraft into numbered systems and simplify locating maintenance instructions. Regarding the above statement,

Which of the following includes all the regulatory definitions of 'maintenance'?

(1) a supplemental type certificate may be issued to more than one applicant for the same design change, providing each applicant shows compliance with the applicable Airworthiness requirement (2) an installation of an item manufactured in accordance with the technical standard order system requires no further approval for installation in a particular aircraft Regarding above statements,

What is the maximum penalty for cheating or other unauthorized conduct when taking an FAA mechanic test?

Which regulation provides information regarding instrument range markings for an airplanes certificated in the normal category?

What information is generally contained in aircraft specifications or type certificate data sheets?

te action required by an AD may take what form? 1 inspection 2 Part(s) replacement 3 design modification 4 Change in operating procedure(s) 5 overall change in the content, firm and disposition of the aircraft maintenance records.

Airworthiness directives are issued primarily to

Specifications pertaining to an aircraft model manufactured under a type certificate, of which registry, can be found in the

The following words are an example of what kind of statement in an AD? Required within the next 25hrs time-in-service after the effective date of this AD, unless already accomplished

Under the Federal aviation regulations, an aviation maintenance technician is required to perform maintenance on an aircraft so that it

when is a mechanic responsible for checking AD compliance?

When information is generally contained in aircraft specifications or type certificate data sheets?

The issuance of an Airworthiness certificate is governed by

An a mechanic privileged to perform major alterations on U.S certificated aircraft; however, the work must be done accordance with FAA-approved technical data before the aircraft can be returned to service. Which is Not approved data?

Technical information about older aircraft models, of which no more than 50 remain in service, can be found in the

Where are technical descriptions of certificated propellers found?

The air transport association of America (ATA) Specification No. 100 (1) establishes a standard for the representation of technical data in maintenance manuals (2) divides the aircraft into numbered systems and subsystem in order to simplify locating maintenance instructions

Which of the following are sometimes used as authorization to deviate from an aircraft's original type design? 1 FAA Form 337 2 supplemental type certificate 3 Airworthiness directives 4 technical standard order

When an airworthy (at the time of sale) aircraft is sold, the Airworthiness certificate