暗記メーカー
ログイン
afcar and pcar
  • Dea Marie Pelingon

  • 問題数 58 • 5/13/2024

    記憶度

    完璧

    8

    覚えた

    23

    うろ覚え

    0

    苦手

    0

    未解答

    0

    アカウント登録して、解答結果を保存しよう

    問題一覧

  • 1

    Which of the following would indicate a general weak-engine condition when operated with a fixed-pitch propeller or test club?

    Lower than normal static RPM, full throttle operation.

  • 2

    Rernoval, installation, and repair of landing gear tires in PCAR 5.1.1.2 Is?

    Preventive Maintenance

  • 3

    Acertiicate or rating issued to an approved malntenance organizatlon isvalid for how many year/s from the date of issuance subject to Compliance with the AMO procedure manual?

    5 years

  • 4

    Disassembly of a crankcasse or crankshaft of a reclprocating engine equipped with an integral Supercharger Is an example of (Part IS.5.1.1.2)

    Powerplant major repair

  • 5

    The cotracting state on whose Reglster is entered.

    State of Registry

  • 6

    A document signed by an authorized representative of an Approved Maintenance Organization (AMO) in respect to an inspection, repair, or modification on a complete aircraft, engine, or propeller after it has received maintenance performed (Part IS: 5.1.1.2) Maintenance Release Airworthiness certificate Return to service

    Return to service

  • 7

    All Philippine registered aircraft used in general aviation shall be re weighed

    Every 5 years

  • 8

    Modification of the basic design not made in accordance with the recommendations of the appliance manufacturer or in accordance with applicable airworthiness directives is considered as (Part IS: 5.1.1.2)

    Appliance major modification

  • 9

    Owners or operators of airplane over 5,700 kg and helicopters over 3,175 maximum take-off weight shall report to the Authority and to the organization responsible for the aircraft type design any failure, malfunction, or defect be made within

    3 working days

  • 10

    A holder of an AMT license desiring to renewW must accomplish and submit the requirements wthin how many days prior to the expiry of his/her license?

    30 days

  • 11

    Replacing defective safety wiring or cotter pins İs Progressive maintenance Routine maintenance Preventive maintenance

    Preventive maintenance

  • 12

    Installation of an accessory that Is not approved for the engine is an example of

    Powerplant major modificatlon

  • 13

    No person may assign, nor shall any person perform maintenance functions for aircraft unless that person had a minimum rest period of how many hours prior to beginning of duty? 6 hrs 8 hrs 10 hrs

    8 hrs

  • 14

    What is classified as a major repair?

    Splicing of skin sheets.

  • 15

    The installation or removal of equipment of equal or less weight and in the same location as the last listed as optional equipment in the aircraft specifications is An airframe minor alteration. An airframe minor repalr. An airframe major alteration.

    An airframe minor alteration.

  • 16

    Calibration and repair of instruments is an example of (Part IS: 5.1.1.2)? Appliance major alterations Appliance major repair Components major repair

    Appliance major repair

  • 17

    Who is responsible for ensuring that all aircraft maintenance records are kept up to date?

    Aircraft owner

  • 18

    The Approved Maintenance Organization (AMO) shall relieve the person performing maintenance functions from all duties for 24 hours after working for

    7 Consecutive Days

  • 19

    All Philippine registered aircraft used for commercial or aerial work operations shall be re-weighed

    Every 3 years

  • 20

    Special repair to structural engine parts by welding, plating, metalizing, or other methods is an example of (Part IS: 5.5.1.2)

    Powerplant major repair

  • 21

    The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, when it has been disassembled, cleaned, inspected as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limits. Repair Rebuild Overhaul

    Rebuild

  • 22

    A certification confirming that the maintenance work to which it relates has been complied with in accordance with the applicable standards of airworthiness using approved data.

    Maintenance Release

  • 23

    Change to the hub design is?

    Propeller Major Modification

  • 24

    An experimental certificate for research and development, showing compliance with regulations, crew training, or market survey, after the date of issue or renewal unless the authority prescribes a shorter period, are effective for how many year/s?

    1 year

  • 25

    In compliance with the recent experience requirements, a licensed AMT may not exercise the privileges of his/her license or rating unless he/she served as an AMT under his/her license and rating for at least 6 months within the preceding

    24 months

  • 26

    When overhauling electrical equipment, all necessary information should be obtained from

    Maintenance instructions published by the aircraft or equipment manufacturer.

  • 27

    Where would find the recommended statement for recording the approval or disapproval for return to service of an aircraft after a 100-hour or annual inspection? 14 CFR Part 91 14 CFR Part 65 14 CFR Part 43

    14 CFR Part 43

  • 28

    Rewinding the field coil of an electrical accessory is an example of?

    Appliance Major Repair

  • 29

    The alteration of an aircraft or aeronautical product in conformity with an approved standard is called

    Modification

  • 30

    Replacing any cowling not requiring removal of the propeller or disconnection of flight controls is considered

    Preventive maintenance

  • 31

    The AMO shall relieve the person performing maintenance functions from all duties for how many consecutive hours during any 7 consecutive day period?

    24 hrs

  • 32

    Simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operation is known as Appliance major repair Preventive maintenance Powerplant/airframe minor repair

    Preventive maintenance

  • 33

    Removal of accessories that are listed as required equipment on the aircraft or engine specification is an example of

    Powerplant major modification

  • 34

    Fabrication performed in the wing main ribs and compression members is a (|S: 5.1.1.2)

    Airframe Major Repair

  • 35

    Which part of Philippine Civil Aviation Regulation prescribes the requirements for certification of an aircraft and aeronautical components for continuing airworthiness?

    PCAR Part 5

  • 36

    What is the regulatory definition of preventive maintenance?

    Simple or minor preservation operations and the replacement of small standard parts, not involving complex assembly operations.

  • 37

    The Contracting State which approved the original type certificate and any subsequent supplemental type certificates for an aircraft, or which approved the design of an aeronautical product or appliance.

    State of Design

  • 38

    Who is responsible for ensuring that all maintenance required to be carried out in the hangar plus any defect rectification carried out during base maintenance, is carried out to specified design and quality standards?

    Line Maintenance Manager

  • 39

    Who is responsible for maintaining an aircraft's airworthy condition including compliance with all airworthiness directives? (PCAR 5.3.1.2)

    Registered owner or operator

  • 40

    Changes to the basic design of the fuel or oil system is considered

    Airframe major modification

  • 41

    An applicant for an AMT license and any associated rating shall be at least

    18 years old

  • 42

    The state that has jurisdiction over the organization responsible for the final assembly of the aircraft engine or propeller.

    State of Manufacture

  • 43

    How long does a holder of a certificate issued under 14 CFR Part 65 have to notify the authority after any change in permanent mailing address?

    30 days

  • 44

    Calibration of avionics or Computer equipment is an example of? Appliance Major Modification Appliance Major Repair Preventive Maintenance

    Appliance Major Repair

  • 45

    If an aircraft is not approved for return to service after an annual inspection and it needs to fly to another location to perform a modification,

    The owner must obtain a special flight permit.

  • 46

    In situations involving unscheduled aircraft unserviceability, persons performing maintenance functions for aircraft may be continued on duty for

    Up to 16 consecutive hours; or 20 hours in 24 consecutive hours.

  • 47

    Refinishing decorative coating of fuselage, wings, tail group surfaces (excluding balanced control surfaces), fairings, cowling, landing gear, cabin, or cockpit interior when removal or disassembly of any primary structure or operating system is not required is

    Preventive maintenance

  • 48

    Conversions of any sort for the purpose of using fuel of a rating or grade other than that listed in the engine specifications is (Part IS 5.1.1.2)

    Powerplant major modification

  • 49

    An Aviation Maintenance Technician or Specialist who seeks reinstatement of his/her license that has already expired for 24 months from expiration date shall

    Pass the Civil Aviation Regulations test and must undergo the appropriate recurrent training from an Approved Maintenance Organization, or any school or facility accredited by the Authority for such purpose.

  • 50

    An applicant for an AMT license for Powerplant and Airframe ratings relying solely on practical experience shall provide documentary evidence of 24 months of practical experience 60 months of practical experience 30 months of practical experience

    60 months of practical experience

  • 51

    Any maintenance operation requiring the opening of cold and hot sections of a turbine is considered

    Powerplant major repair

  • 52

    Replacing or cleaning spark plugs and setting of spark plug gap clearance is considered as? (Part IS 5.1.12)

    Preventive maintenance

  • 53

    A permanent record of every maintenance (not including preventive maintenance) repair of building or alterations on any airframe, powerplant, propeller, or appliance shall be maintained by

    The registered operator.

  • 54

    Standard certificate of airworthiness directives, special certificate of airworthiness directives, and certificate of airworthiness issued for restricted or limited category aircraft, as long as the maintenance, preventive maintenance and alterations are performed, are effective for how many year/s?

    1 year

  • 55

    Who is authorized to repair an aircraft instrument?

    Certified repair station approved for that instrument

  • 56

    Following unscheduled duty periods, the person performing maintenance functions for an aircraft shall have mandatory rest period of

    10 hrs

  • 57

    No person may schedule a personnel to perform a maintenance task on an aircraft for more than how many consecutive hours of duty?

    12 hrs

  • 58

    Who is responsible for maintaining the aircraft from unairworthy condition?

    Licensed Aircraft Maintenance/Mechanic