問題一覧
1
What are the components of stopping sight distance?
Reaction Distance and Braking Distance
2
Primary consideration in the design of geometric cross-section of, highways, runways and taxiways
Drainage
3
The maximum number of vehicles, passengers, pedestrians or the like, which can be accommodated by a given facility under a given level of service.
volume
4
This is commonly identified as primary, secondary and working control on the jobsite?
Horizontal control
5
During the baseball practice, a batter hits a very high fly ball and runs in a straight line and catches it. Which has the greater displacement, the player or the ball?
The player and the ball have the same displacement
6
Waves under the influence of the winds that generated them are called:
Swells
7
The maximum sustained 15-minute rate of flow, expressed in passenger cars per hour per lane, which can be accommodated by a uniform freeway segment under prevailing traffic and roadway conditions in one direction is called:
Capacity
8
Warn road users of condition on or adjacent to the road that may be unexpected or hazardous.
Warning signs
9
The purpose of installing edge lines is generally based on the following expect one
I. To discourage travel on road shoulders
II. To make driving safer and more assured, particalarly at night and during inclement weather by providing a continuous guide for the driver
III. To act as a guide past objects, which are close to the edge of pavement and which construte a hazard
IV. To prevent parking at or near intersections
V. To delineate the edge of the travelled way to distinguish it from the shoulder area
V
10
It is the maximum number of vehicles, which have a reasonable expectation of passing over a given section of a lane or a roadway in one direction or in both direction during one hour under prevailing road and traffic conditions.
Road capacity
11
Pavement markings shall only he applied and for removed by:
DPWH
12
Guide signs are generally ________ in shape.
rectangular
13
It is the maximum number of vehicles, which have a reasonable expectation of passing over a given section of lane or roadway in one direction or in both direction during one hour under prevailing road and traffic conditions.
Road Capacity
14
The overall track structure for a railroad typically consists of the following except one
I. Subgrade
II. Ties
III. Ballast
IV. Rails
V. Spikes
VI. Rails fastening
III
15
In the standard practice of measuring vertical or zenith angles, the following practices are of great importances
I. Be sure the instrument is level.
II. Sight with the vertical crosshair.
III. Sight exactly on the target.
IV. Sight direct and reverse.
I, III and IV only
16
It is the maximum number of vehicles, which have a reasonable expectation of passing over a given section of lane or roadway in one direction or in both direction during one hour under prevailing road and traffic conditions.
Road Capacity
17
The overall track structure for a railroad typically consists of the following except one.
I. Subgrade
II. Ballast
III. Spikes
IV. Ties
V. Rails
VI. Rails fastening
III
18
In the standard practice of measuring vertical or zenith angles, the following practices are of great importance:
I. Be sure the instrument is level.
II. Sight with the vertical crosshair.
Ill. Sight exactly on the target.
IV. Sight direct and reverse.
Which standard practices are true?
I, III and IV only
19
In many parts of the world, the high waters reach their greatest height and the low waters at the least height, soon after the time of full and new moon, this tides are called:
Spring tides
20
Which of these contour characteristies is not true?
Contours on the ground can cross another
21
Based on the expression on the technical resolution of the International Water Way Congress, about how many percent of tide is guaranteed safe for the ships?
98%
22
A very thin surface applied over a bituminous pavement to make it impervious is called?
tack coat
23
The number of days final curing for a concrete cement pavement is done for
28 days
MSTE
MSTE
Justin · 100問 · 2年前MSTE
MSTE
100問 • 2年前Justin
PSAD
PSAD
Justin · 50問 · 2年前PSAD
PSAD
50問 • 2年前Justin
HGE
HGE
Justin · 47問 · 2年前HGE
HGE
47問 • 2年前Justin
LOOKS FAM (MSTE)
LOOKS FAM (MSTE)
Justin · 61問 · 2年前LOOKS FAM (MSTE)
LOOKS FAM (MSTE)
61問 • 2年前Justin
MPLE
MPLE
Justin · 41問 · 1年前MPLE
MPLE
41問 • 1年前Justin
Weekly Test 1
Weekly Test 1
Justin · 50問 · 1年前Weekly Test 1
Weekly Test 1
50問 • 1年前Justin
Weekly Test 2
Weekly Test 2
Justin · 50問 · 1年前Weekly Test 2
Weekly Test 2
50問 • 1年前Justin
Weekly Test 3
Weekly Test 3
Justin · 50問 · 1年前Weekly Test 3
Weekly Test 3
50問 • 1年前Justin
Refresher SPDI 1
Refresher SPDI 1
Justin · 100問 · 1年前Refresher SPDI 1
Refresher SPDI 1
100問 • 1年前Justin
Refresher SPDI 1
Refresher SPDI 1
Justin · 9問 · 1年前Refresher SPDI 1
Refresher SPDI 1
9問 • 1年前Justin
Refresher Plumbing Code
Refresher Plumbing Code
Justin · 28問 · 1年前Refresher Plumbing Code
Refresher Plumbing Code
28問 • 1年前Justin
Definition of Terms 1
Definition of Terms 1
Justin · 90問 · 1年前Definition of Terms 1
Definition of Terms 1
90問 • 1年前Justin
Definition of Terms 2
Definition of Terms 2
Justin · 90問 · 1年前Definition of Terms 2
Definition of Terms 2
90問 • 1年前Justin
Definition of Terms 3
Definition of Terms 3
Justin · 90問 · 1年前Definition of Terms 3
Definition of Terms 3
90問 • 1年前Justin
問題一覧
1
What are the components of stopping sight distance?
Reaction Distance and Braking Distance
2
Primary consideration in the design of geometric cross-section of, highways, runways and taxiways
Drainage
3
The maximum number of vehicles, passengers, pedestrians or the like, which can be accommodated by a given facility under a given level of service.
volume
4
This is commonly identified as primary, secondary and working control on the jobsite?
Horizontal control
5
During the baseball practice, a batter hits a very high fly ball and runs in a straight line and catches it. Which has the greater displacement, the player or the ball?
The player and the ball have the same displacement
6
Waves under the influence of the winds that generated them are called:
Swells
7
The maximum sustained 15-minute rate of flow, expressed in passenger cars per hour per lane, which can be accommodated by a uniform freeway segment under prevailing traffic and roadway conditions in one direction is called:
Capacity
8
Warn road users of condition on or adjacent to the road that may be unexpected or hazardous.
Warning signs
9
The purpose of installing edge lines is generally based on the following expect one
I. To discourage travel on road shoulders
II. To make driving safer and more assured, particalarly at night and during inclement weather by providing a continuous guide for the driver
III. To act as a guide past objects, which are close to the edge of pavement and which construte a hazard
IV. To prevent parking at or near intersections
V. To delineate the edge of the travelled way to distinguish it from the shoulder area
V
10
It is the maximum number of vehicles, which have a reasonable expectation of passing over a given section of a lane or a roadway in one direction or in both direction during one hour under prevailing road and traffic conditions.
Road capacity
11
Pavement markings shall only he applied and for removed by:
DPWH
12
Guide signs are generally ________ in shape.
rectangular
13
It is the maximum number of vehicles, which have a reasonable expectation of passing over a given section of lane or roadway in one direction or in both direction during one hour under prevailing road and traffic conditions.
Road Capacity
14
The overall track structure for a railroad typically consists of the following except one
I. Subgrade
II. Ties
III. Ballast
IV. Rails
V. Spikes
VI. Rails fastening
III
15
In the standard practice of measuring vertical or zenith angles, the following practices are of great importances
I. Be sure the instrument is level.
II. Sight with the vertical crosshair.
III. Sight exactly on the target.
IV. Sight direct and reverse.
I, III and IV only
16
It is the maximum number of vehicles, which have a reasonable expectation of passing over a given section of lane or roadway in one direction or in both direction during one hour under prevailing road and traffic conditions.
Road Capacity
17
The overall track structure for a railroad typically consists of the following except one.
I. Subgrade
II. Ballast
III. Spikes
IV. Ties
V. Rails
VI. Rails fastening
III
18
In the standard practice of measuring vertical or zenith angles, the following practices are of great importance:
I. Be sure the instrument is level.
II. Sight with the vertical crosshair.
Ill. Sight exactly on the target.
IV. Sight direct and reverse.
Which standard practices are true?
I, III and IV only
19
In many parts of the world, the high waters reach their greatest height and the low waters at the least height, soon after the time of full and new moon, this tides are called:
Spring tides
20
Which of these contour characteristies is not true?
Contours on the ground can cross another
21
Based on the expression on the technical resolution of the International Water Way Congress, about how many percent of tide is guaranteed safe for the ships?
98%
22
A very thin surface applied over a bituminous pavement to make it impervious is called?
tack coat
23
The number of days final curing for a concrete cement pavement is done for
28 days