Material Cleaning Equipment

Sieving happens when a rotating shaft with shutters spreads the materials on the walls of the cylindrical screen by applying centrifugal force.

BUHLER DFAV

A self-cleaning metal separator installed after a cleaning sieve using a stationary permanent magnet inside a rotating drum

Impurities Can be remove through?

Series of plate magnets

Transforms the inertia force of gas particle flows to a centrifugal force by means of a vortex generated in the cyclone body which makes the particulates fall into the dust collection chamber attached to the bottom of the cyclone

The material is sieved due to the rolling motion of materials inside the drum causes the foreign materials to move along the spiral ribbon to the overs outlet.

Sieving in two Categories

Designed for gravity spouting after a cleaning sieve

Impurities

Utilizes an oscillating movement on the screen and upward airflow to allow lighter particles to float while the heavy particles settle at the bottom.

Where should ASPIRATION SYSTEM be observed?

components of aspiration system

TYPES OF DUST SEPARATORS

Same principle as rotary magnet but the material is fed unto a belt.

Uses permanent magnets to protect machines such as pellet mill, hammer mill, etc. from potentially damaging ferrous objects

It is used for grain cleaning to remove sand, straw, and husks through the oscillating or vibrating motion of the two sieve decks.

Allows lighter materials flowing along the airstream to material discharge and heavier materials like stones will fall unto a separate collector

BUHLER MMUD

Particle Separation

Buhler MKZM