問題一覧
1
In addition to normal CTK identification, oxygen system maintenance kids will be
For oxygen system use only
2
Support sections will designate a TMDE monitor who will act as a focal point with a designated servicing PMEL for managing calibration requirements
true
3
Ensure classified TMDE is protected in accordance with
16-1404
4
Shift inventories must be documented by
Both outgoing and incoming personnel
5
CTK custodians will ensure all tools are inspected and serviceable in accordance with
32-1-101
6
manage Etools IAW
00-5-1
7
consist of nine characters, of which the first four characters will be a unique WWID
Equipment identification code
8
identities the base,unit and shop. the remaining five characters are for tool/CTK numbering
WWID
9
the first two characters of the WWID in the EID are based on the wing/unit ___. multiple wee gs at the same base must have different WWID codes
PAS base code
10
the third and fourth characters in a EID designate the ____ by using unique characters
unit and shop
11
the ___ will establish the remaining five characters of the EID for CTK tools
unit
12
Tools located inside the toolbox may be marked with less than nine digits but must contain ____ That ties the tool back to the CTK
4 digit WWID
13
for items that she’s likely or mechanically checked tolerances that require calibration etching is required for the CTK
false
14
if CTK marking is in question consult ____ or P mail to validate Applicable marking criteria
00-20-14
15
work centers will review locally manufactured tools and requirements every ___ For applicability in current configuration
2 years
16
all equipment designated for use with nuclear weapons test and handling must meet requirements
91-203
17
Must be maintained for all LME items except hand tools
form 244
18
equipment without technical data must, as a minimum, be inspected every ___ For corrosion, physical defects and lubrication as required
180 days
19
Process reports for tools that are lost, damage, or destroyed, due to neglect in accordance with
23-101
20
Tool rooms must be capable of being locked and afford a protective measures such as monitoring, 24 hour coverage, or control key access
true
21
when all city caves are not capable of being secured in the tool room the ____ Will design a process to prevent the unauthorized use or access of tools and equipment
NCOIC/chief
22
Locks are required for tools and equipment that are stored within secured tool rooms or worked on it
false
23
____ Need to ensure all assigned personnel are familiar with lost tool/item procedures
superisors
24
The operations officer/MX superintendent will determine when the search for the lost item/tool may be discontinued
true
25
Each AFE session will prepare and submit and ____ Budget and our financial plan to their unit CC
annuel
26
The OSS AFE section will establish its own supply account IAW 22-101 & 23-122
true
27
the MAJCOM, formerly designated as Sir force Space Command(AFSPC) was redesignated as U.S Space Force(USSF)
true
28
the Air Force To system includes the ________________________ to manage and use TOs
TO, infrastructure, training and resources
29
Establishes policies and responsibilities for the implementation of AFPD
department of Air Force and Air Force instruction (DAFI/AFI)
30
Provide instruction for the operation and maintenance of Air Force military system and end items
technical order (TO)
31
in the case of conflict between procedures and general TOs and Air Force occupational safety and health standards (AFOSH)
Follow the more restrictive requirements
32
Prior to starting any task all applicable TOs must be reviewed for familiarization with the latest procedures
true
33
when requesting a waiver for specific weapon system TO, submit using ____
DAF form 697
34
To enhance mission effectiveness at all levels, while preserving resources in safeguarding health and welfare
Techincal order waiver
35
Waiver requests will be evaluated by
HQ AFMC/A4F
36
Waiver request will be disposition by
HQ AFMC/A4
37
Approval/disapproval of waiver request should be returned within
30 days
38
applies to computer equipment that connects directly to weapons systems or computer equipment used to support but does not connect to the weapon system
Computer security (COMPUSEC)
39
Computer systems that connect to a weapon system are referred to as etools
false
40
follow _____ chapter 5 When sanitizing, purging, discarding and destroying removable media used with weapon system and test/maintenance
AFMAN 17-1301
41
may direct retention of O&M TOs on board operational aircraft
group commanders
42
library’s will be maintained in permanently grounded aircraft
false
43
require that applicable -1, -5, and -9 TOs and the aircraft weight and balance handbook will be carried on cargo type aircraft to facilitate loading operations during international combined operations involving NATO, CENTO, and ASCC nations
provisions of north Atlantic Treaty organization standardization agreement (NATO STANAGs) 3462 and 3767, Central Treaty organization(CENTO) 3462 and 3767 and Air standardization coordinating committee(ASCC) AIR STD 44/16D
44
libraries will not be removed from aircraft sent for programmed depot maintenance (PDM)
false
45
libraries remaining on board an aircraft arriving to depot will be crated and shipped back to home station
true
46
will control the distribution of TOs to eligible contractor recipients
TODO
47
personal copies of Flight Manual Programs publications are given to ____ on active flying status
pilots and flight crew
48
Will provide user access according to the most restrictive distribution limitations of the ETO contained there in
TODO and TODA
49
Contractors must submit a contract related TO library access request, including a list of specific TOs to be access, through the GAA. The GAA will provide a letter to the TO library custodian approving access or designated contractor personnel and identifying TO approved for contractor use by system/program technical content manager
true
50
binders do not requires labels indicating contects
false
51
a cross reference sheet will be used to indicate the location of all physical distribution media TOs filed or stored
true
52
schematics and working diagrams will be laminated with protective plastic covering, and kept in a designated location when not in use
true
53
when TOs are used together in a set the MAJCOM or unit may allow filing the set in set binders numbered as SET (X) of (Y)
true
54
all eTOs must be connected and configured IAW
31S5-4-ETOOL-1
55
must stay connected to ETIMS through AF portal to receive TO updates for transfer to secondary etools
primary etools
56
must be connected to the primary at least every seven calendar days
secondary etools
57
any E tool updated within ____ Of the loss of connectivity will be considered current
seven calendar days
58
deployed etools will be synced within ___ of return to home station
7 calendar days
59
for deployments exceeding 60 days etools updates will be forwarded and posted at least every ___ calendar days until return to home station
seven calendar days
60
upon return from deployment to home station etools will resume normal posting/syncing operations within ___
5 working days
61
TODO and TODA are notified of TO/CPIN updates on ETIMS home page under “new TOs that may be of interest to you” and “new increments that may be of interest to you”
true
62
TODOs and TODAs will verify currency every __ for TOs not associated with an ETIMS subscriptions
seven days
63
TODO and TODA will verify rescinded paper TOs have been pulled from active use within ___ of the rescission date
30 days
64
ETIMs shipping address must be validated every ___ for accounts in subscription to physical media
90 days
65
to open interlocking bags how long should the two pieces of tape at the opening be
3 inches in length
66
stencil installation date on the outside of the MK 12/124
1/4 or 1/2 in lettering
67
flare To
11A10-26-7
68
all Container repairs cure for at least
72 hours
69
attach MK-124 flare by ___ diameter nonslip loop
1 1/2 in
70
escape and evasion first aid kit
00-35A-39
71
if AN-PRQ-7 or AN-PRQ-7A radio is installed TO _______ will be attached to same pocket
31R2-2PRQ7-21
72
lanyard length of compass in vest
60 inches
73
survival kit knife should be able to cut standard ___ pound test cord
550 pound
74
One Man Life Raft TO
14S-1-102-11
75
when using Raft repair plugs, tighten by hand and an additional ____ turns
1/2 to 3/4
76
MS-2000 TO
14S10-2-2
77
tourniquet loop diameter
8 inches
78
flex pack water has a shelf life code of 9(shelf life of __ )
60 months
79
lithium batteries DOM ___ DOI ___
5 year, 3 years
80
alkaline battery DOM ___ DOI ___
3 years, 2 years
81
battery voltage should read ___
1.5 volts
82
9V battery should read ___
7.2 Volts
83
serviceable tag (Yellow)
DoD Form 1574
84
unserviceable Tag (red)
DoD Form 1577
85
unserviceable Tag, Repairable (green)
DoD Form 1577-2
86
the abandon ship food packet is used to sustain one person for ___
3 days(2 bars per day)
87
the weight of the abandon ship food packet is 5.20 ounce per packet and 48 pounds per case. there are ___ packets per case
25
88
each abandon ship food packet provides approximately ___
2,400 kilocalories
89
abandon ship food packet shelf life
5 years
90
temperatures over 100 degrees will shorten service life of survival food packet to ___
12 months
91
each survival food packet provides ____
1,447 calories
92
aircraft life raft food packet contains hard candy and candy coated gum providing ____
300 calories
93
cold weather meal shelf/service life
3 years
94
Even if a full LEP check is performed an annual LEP check is still required
false
95
If a classified TO needs to be destroyed they will do so in accordance with
5200.01 AFMAN 16-1404 vol 1-3
96
what is the heart of the AN/AVS-9
binocular assembly
97
Presents the intensified image to the human eye and compensates for variation of your eyesight
Eyepiece lens
98
it takes approximately ______ for your eyes to adapt to the dark
10 minutes
99
personnel performing maintenance on the AN/ACS-9 series goggles must have 2020 vision or corrected 2020 vision in both eyes
false