Which of the following mechanism represents an inversion of a single slider crank chain?

What is a unique form of cast iron with worm shaped graphite particles?

What is the process of making Bolt heads by forging?

What do you call the difference between the higher limit and lower limit of size?

Which of the following is the major alloying element in invar?

Which of the following is available in five slightly different nominal composition for applications which require high strength, good fabricating and fusing qualities, immunity to rust, free machining and a corrosion resistance equivalent to copper?

Which of the following superalloys is age-hardenable?

__________ is the range of working temperature for soldering process.

How are fullers used?

Which of the following is an example of drilling?

__________ is also known as tube mills and are commonly used for wet grinding

Which of the following device is used for transmitting energy in CNC Machine tools?

Aluminum is particularly satisfactory for applications requiring all of the following characteristics except _________

____________ Is a polymer of chloroprene of the monovinyl acetylene type.

Why are Plasticizers added to plastics?

A planer mechanism has 8 links and 10 rotary joints. Using a Gubler’s criterion, calculate the number of degree of freedom of the mechanism.

The Train Value of a Gear Train is__________

It is an age wrought iron which has mechanical properties comparable to those of heat treated alloy steel of the same order of hardness and resistance to corrosion similar to that of monel. What is this alloy of Nickel?

Kevlar epoxy composite is widely used in __________

An interrupted quenching process resulting in an austenite to martensite transition is _______.

When crank rotates with uniform speed, it has _________ acceleration only.

Hand shears can be used for cutting sheets up to _________.

The moment diagram for a cantilever beam subjected to bending moment at the end of beam will be ________.

For a simply supported beam on two end support the bending moment is maximum

Generally, In case of pure bending moment is constant throughout and the shear force is

Which type of key is used for mounting shifting gears in gear boxes?

Hard shifting of gears is due to

Which of the following key is preferred for the condition when a large amount of impact type torque is to be transmitted in both direction of rotation?

Guest’s Theory of failure is applicable for following type of materials

Rankine Theory of failures is applicable for the following type of materials

Idler Pulley is used for

The Motion of a shaft in a circular hole is an example of ________

The angle between the line of stroke (line of motion of the follower) and the normal to the pitch curve at any point is preferred to as ______ angle.

Which of the following thermit welding procedure welding procedures, produced high temperature?

In sulfuric acid, which of the following is suitable for handling acid in concentrations up to 50% and at a temperature including the boiling point?

What account for the backlash of spur gears?

A cotter joint is used to connect two __________ rods.

The rated life of a bearing varies

The center to center distance between two consecutive rivets in a row, is called

When more than one spring or resisting member shares the load, the relative stiffness is the _______.

Which of the following is a single crystal grown by vapor disposition?

Mechanical impact device that accepts accept material smaller than approximately 4 inches.

Which of the following occurs whenever is a disconuity or non-uniformity in an object?

A hard Material __________

Which of the following is one of the best methods for increasing a spring fatigue’s life?

The Distortion energy theory is known as _________.

Which type of gears are used for shaft axes having an offset?

Surface hardening is desirable for a product that is subject to ______.

Which of the following is the ratio of the fatigue strength without a stress concentration to the fatigue stress with a stress concentration.

If the value of theoretical stress concentration is 1.0, then the value of fatigue stress concentration factor is equal to

Stress concentration in static loading having high influence in ____.

Notch Sensitivity varies between

A force which is gradually applied and does not change in magnitude and direction with respect to time is called ______.

_______ is defined as the maximum stress to which a material can be subjected without fatigue, regardless of the number of cycles.

_______ is defined the localization of the high stresses due to the irregularities present in the component and abrupt changes to the cross section.

What is the most suitable material in TIG welding process

Fixing of both ends of simply supported beam that has only concentrated load at the midspan will increase the allowable load by ________.

Spring back metal forming depends on _______.

In order to get uniform thickness of the plate by rolling process, one provides

What is the results when mers join with a high degree of regularity in chain structure and mer orientation

When column is subjected to an eccentric load, the stress induced in the column will be ______

A lap joint is always in _________ shear.

The columns whose slenderness ratio is less than 80, are known as

The angle of twist of shaft is

The strap end of a connecting rod of steam engine is joined by

Transverse fillet welded joints are designed for

Stress Concentration factor is caused due to

Wahl's stress factor __________ very rapidly as the spring index decreases.

In the levers of first type, the mechanical advantage is ________ one.

For standard coarse threads of nut, the threads will be as strong in failure by shear as the bolt in tension, if the height of nut (h) is approximately

In leaf springs, the longest leaf is known as