MIDTERM (Starts on lock)

54問 • 11ヶ月前

問題一覧

defined as a mechanical, electrical, hydraulic or electronic device designed to prevent entry to a building or room

LOCK

a portable and detachable lock having a pivoted or sliding hasp which possesses through a staple ring, or the like and is made fast or secured.

PADLOCK

is a type of lock that uses a set of obstructions, or wards, to prevent the lock from opening unless the correct key is inserted. The correct key has notches or slots corresponding to the obstructions in the lock, allowing it to rotate freely inside the lock

WARDED LOCK

is a lock mechanism that uses pins of varying lengths to prevent the lock from opening without the correct key

PIN TUMBLER LOCK

lock used in a safe deposit box and is for all purposes. It is also used in desk, lockers and cabinets and is generally less secure than pin tumbler lock

LEVER TUMBLER LOCK

is a lock composed of slotted rotating detainer discs. A specially cut key rotates these discs like the tumblers of a safe to align the slots, allowing the sidebar to drop into the slots, thus opening the lock .

DISC TUMBLER LOCK

is commonly designed for the automobile industry and general use in car doors today

DISC TUMBLER LOCK

General Group of Locks

WARDED LOCK, PIN TUMBLER LOCK, LEVER TUMBLER LOCK, DISC TUMBLER LOCK

What is the device used to opened the key-opperated lock?

KEY

It uses some sort of arrangement of internal physical barriers which prevent the lock from operating unless they are properly aligned. The key is the device used to align these internal barriers so that the lock may be operated

KEY-OPERATED LOCK

Most of this lock has three dials but some locks have four dials for greater security.

COMBINATION LOCK

type of lock that can be opened by inserting a coded card in a slot in the lock, or by pushing the correct button on the surface of the lock.

CARD-OPERATED LOCK/CODED LOCK

type of lock that can be closed and opened remotely by electronic means.

ELECTRONIC LOCK

a machine that can be used for identification of humans by their characteristics or traits. It is used as a form of identification and access control. It is equipped with a recording device that can identify the person operating the lock and the time it was operated.

BIOMETRICS

TYPES OF LOCK

KEY-OPERATED LOCK, COMBINATION LOCK, CARD-OPERATED LOCK, ELECTRONIC LOCK

a key to a single lock;

CHANGE KEY

a key that can open all locks within a particular area or grouping

SUB-MASTER KEY

a special key capable of opening a series of locks. It is capable of opening fewer locks than grand master key

MASTER KEY

a key that can open everything in a system involving two or more master key groups.

GRAND MASTER KEY

A term used in England for lock picker, safecrackers, and penetrators of restricted areas or rooms

PETERMAN

Genuine key stolen from the owner

FALSE KEY

metallic container used for the safekeeping of documents or small items in an office or installation. It can be classified as both robbery and burglary resistance depending upon the use and need.

SAFE

heavily constructed fire and burglar resistance container usually part of the building structure used to keep and protect cash, documents and negotiable instruments. It is bigger than safe but smaller than a File Room.

VAULT

A cubicle in a building constructed to be little lighter than a vault but bigger in size. It can accommodate limited people to work on the records inside

FILE ROOM

Safe Specifications

At least 750lbs. Below 750 must be anchored to the building structure. 1 inch thick steel. Door should be 1 ½ thick steel

Vault Specifications

Doors should be 6 inches thick made of steel Walls, ceilings and floor should be 12 inches thick Floors should be elevated by 4 inches Not more than 5,000 cubic feet in size Vault doors must be fire resistant for up to 4 to 6 hours.

File room Specification

Should be 12 feet high Interior cubage should be not more than 10,000 cubic feet Watertight door, fire proof for 1 hour.

Some Test for Fire Resistance:

FIRE RESISTANCE TEST, EXPLAIN HAZARD TEST, FIRE AND IMPACT TEST

In Fire Endurance Test a safe should not have any one time a temperature of ______

350 F

Explain Hazard Test is test to determine if the sudden rise in temperature will not cause the safe to rupture. If the safe can withstand ______________ without cracking or opening then it has passed the test

2000 F FOR 30 MINUTES

Its objective is to determine the strength of a safe to resist the collapse of a building during fire.

FIRE AND IMPACT TEST

is any natural person who offers or renders personal service to watch or guard residential or business premises or both, government and/or their premises for hire and compensation.

SECURITY GUARD

Pursuant to RA 11917, Security Guard are now included in the term ____________

PRIVATE SECURITY PROFESSIONALS

R.A. 11917 is also known as?

PRIVATE SECURITY SERVICES INDUSTRY ACT

R.A. 11917 repealed what law?

R.A. 5487

PNP SOSIA is also known as?

PHILIPPINE NATIONAL POLICE SUPERVISORY OFFICE FOR SECURITY INVESTIGATION AGENCY

PNP SOSIA is under what agency?

CIVIL SECURITY GROUP

is charged with the supervision, direction and control of all security agencies in the Republic.

CIVIL SECURITY GROUP

An age required for applying on Operator or Manager of Security Agency

AT LEAST 25 YEARS OF AGE

The age for the Qualifications of Security Guard or Watchman

AT LEAST 18 YEARS OLD BUT NOT MORE THAN 50 YEARS OLD

To Qualify for Security Officer she/he must have graduated of what course?

SECURITY OFFICER TRAINING COURSE

Qualifications of Security Consultant is must have atleast _____ years of expirience in the operation

10 YEARS

To Qualified to be an private detective you must have graduated of a _____

CRIMINAL INVESTIGATION TRAINING COURSE

It is an act of baseness , vileness or depravity in the private and social duties which a man owes to his fellowmen, or to society in general, contrary to the accepted and customary rule of right and duty between a man and man.

MORAL TURPITUDE

security force maintained and operated by any private company/corporation utilizing any of its employees to watch, secure and guard its establishment.

COMPANY GUARD FORCE

security guard belonging to privately licensed agency

SECURITY AGENCY SERVICE

security unit maintained and operated by any government entity other than military or police.

GOVERNMENT GUARD FORCES

is a written order/schedule issued by a superior officer, usually the private security agency/branch manager or operations officer, assigning the performance of private security/detective services duties.

DUTY DETAIL ORDER

Validity of License to Exercise Security Profession (LESP)

5 YEARS

Any person who does detective work for hire, reward or commission, other than members of the AFP, BJMP, PNP or any other law enforcement agencies.

PRIVATE DETECTIVE

Training and its duration for Basic security guard course

150 HOURS

Training and its duration for Re-training course

48 HOURS

Training and its duration for security officer training course

300 HOURS

Training and its duration Basic security supervisory course

48 HOURS

CLJ1 FINALS

Adrian Ramirez · 95問 · 2年前

CLJ1 FINALS