問題一覧
1
If you need to move a load up or down a ramp, what direction must the load face?
Uphill
2
What is the 'normal' parking procedure of a forklift?
Lower fork arms onto the ground, Park brake applied, Select neutral, Remove key
3
List five (5) checks you should do on tyres and wheels on a forklift.
Air pressure is correct , Tyres not worn down below the wear indicator , Tyres securely fitted to rims, No chunks missing from the rubber tyres, Tyre wear is even
4
What important role does the seatbelt perform on a forklift?
It will stop you from falling out in an accident
5
When moving a forklift with or without a load, what is a 'safe' height to carry the load at?
At axel height or as low as possible
6
What do you look for when stacking loads on top of each other?
Firm Level Surface, Heavy and or Liquid goods at the bottom, High loads may be unstable
7
Pre- operational Checks (walk around) are required to be carried out on a forklift truck before getting on to operate list nine?
No Visible damage, Forks or attachments, Under machine for oil leaks, Mast, Hydraulic rams, Hoses, Data plate, Oils, Battery
8
How can finding out weather forecasts help to plan tasks, especially in relation to outside work? (give 3 reasons)
Prepare for suitable risk controls, Plan the work environment, Schedule work activities
9
Where would you look to find the forklift and attachment rated capacity?
Data Plate
10
Carrying a load on only one fork arm is unsafe. Why is this so?
Stability may be reduced, May damage the forklift, May lose the load
11
Internal combustion engines (petrol, gas, and diesel) produce dangerous gases (carbon monoxide). Why don't we use them in restricted spaces? What type of forklift do you use in restricted spaces with minimal airflow?
The fumes could kill, Electric
12
Explain what a risk is
The chance of a hazard causing harm
13
Having just completed a course and obtained you HRW forklift licence, list four (4) things your employer must provide to you before operating unfamiliar equipment
Information, Training, Instruction, Supervision
14
When can passengers ride on a forklift?
Only if it has been designed to do so
15
What is the name of the steel structure supplied for the gap between a truck and a loading dock? These MUST be secured.
Dock plates OR Bridge plates
16
On conducting a pre-start check you find the data plate is missing or unreadable, what should you do?
Stop, Tag, Report
17
When carrying out HRW as an employee/worker, you have a legislated Duty of Care. List four (4) responsibilities that this implies
Make sure of your own health, Don't put others in danger, Keep others safe, Comply with relevant WHS regulations
18
Operating a forklift with a load raised in a straight line or turning is dangerous, why?
Height can reduce stability
19
List six (6) actions that might cause a forklift truck to tip over frontwards or backwards when moving
Overloaded, Hard braking, Mast tilted forward, Driving too fast, Forward down a slope, Uneven surfaces
20
List three (3) people you would discuss with about workplace hazards before you start work and explain why.
Other workers, Supervisor , Safety Officer , So you know workplace Policies and Procedures for safety
21
Why should the load movement be watched when moving the forklift?
Stability of load and safety to people
22
List five (5) attachments that can be used on a forklift...other than fork tynes
Carpet Spike, Jib, Work Platform, Fork extensions, Drum Clamp
23
What three (3) penalties can the Workplace Health & Safety (WHS) regulator apply if you fail to work safely when doing High Risk Work?
Licence suspended, Licence cancelled, Refusal to renew licence
24
To maintain stability of the forklift and the load, a side-shift attachment should always be
Centred before travelling with a load.
25
List four (4) weather-related hazards that can impact forklift operations
Heat, Smoke, Snow or Ice, Slippery
26
What are the minimum safe distances you must maintain when working on a forklift near power lines in Queensland?
Up to 132,000 volts: 3m, Between 132,000 and 330,000 volts: 6m, Above 330,000 volts: 8m
27
What could the effects on a forklift be after adding any attachment? Give 2.
Capacity of the forklift will be reduced, Load Centre Distance (LCD) may increase
28
What are four (4) ways you can communicate with other workers on site?
Verbal, Written, Signs, Hand Signals
29
How do you find out the voltage of overhead electric power lines?
Check with the local electrical authority
30
Where is it unsafe to park a forklift in a workplace. Provide seven (7) areas
Doorways, Fire-fighting equipment, On sloping surface, First aid stations, Walkways, Emergency exits, Railway crossings
31
What equipment is required to operate a forklift in dark areas or at night?
Adequate lighting
32
Raising or lowering a load near or over people is not allowed, why?
There is a risk of Injury or death
33
If the load is not fully against the heel of the fork arm, how will this affect the operation of the forklift?
Stability and capacity is reduced
34
If your view is obstructed while driving the forklift, what are four (4) things you could do before you move?
Travel in reverse, Use a spotter, Restock Load
35
The point of balance (fulcrum) is where on a forklift?
Centre of the front wheels where the tyre touches the ground and pivots from
36
List four (4) ways the weight of a load can found out?
Consignment note or weighbridge docket, Weighing the load with scales., Calculate the weight, Markings may appear on the load.
37
What is the most common load centre on forklifts in Australia?
600mm
38
How would you find out the correct way of fitting any attachment to a forklift?
Manufacturer's instructions
39
If a co-worker gives you a signal which is not clear to you, what should you do?
Stop and seek clarification
40
List THE FIVE (5) steps you should take if the forklift you are operating comes in contact with electric power lines.
WARN - others to stay clear attempt, BREAK-attempt with lines, STAY - in the machine if it's safe. If you must leave the machine (fire) jump clear without touching the forklift and shuffle away, REPORT - to an authorised person, CHECK-before re-using
41
What effects does a jib attachment have on a forklift? Give three (3) effects
Reduced Load capacity, Increased COG, Swinging load reduces stability, Stability reduced due to change in COG
42
How many days do you have after passing your assessment to apply for your High-Risk Work Licence?
60 days
43
List three (3) things that an employer must do to ensure the health and safety of all employees
Provide safe plant and equipment, Provide safe systems of work, Provide adequate facilities
44
What are six (6) actions that may cause a forklift truck to tip over sideways?
Unsafe speed and turning, Uneven surfaces, Flat tyre, Driving too fast, Turning with load to high, Side shift not centred
45
Post Start Up Checks-List six (6) checks you conduct after your seat belt is on and the engine is started.
Gauges, Lights, Horn, Reverse Beeper, Steering, Brakes
46
When leaving the forklift why should you remove the ignition key?
To prevent unauthorised use
47
List twelve (12) site hazards you need to consider and plan for in the workplace before starting forklift operations.
Power lines, Trees, Overhead services, Awning, Roller doors, Bridges, Buildings, Vehicles, Plant and equipment , Pedestrians, Ground conditions, Poor ligjting
48
When using the forklift why is "rear end" swing dangerous?
Can cause injury to persons or damage to property
49
Explain what a hazard is
A thing with potential to cause harm
50
Why is it unsafe to turn a forklift on a ramp or sloping surface? Provide two (2) reasons
Could result in the forklift tipping over, Losing the load
51
Keeping air filled tyres at correct operating pressure is important, why is this so?
Maintain stability and safety of forklift
52
List five (5) visual indicators used to identify power lines
Tiger Tails, Marker balls, Warning/Danger Signs, Colored Flags, Painted power poles
53
List six (6) safety control measures that can be used to protect pedestrians, other workers, vehicles or mobile plant
Stop / Go person, Hazard lights, Signs, Barriers, Exclusion zones, Traffic management plan
54
Before commencing work, what are eight (8) things you need to consider and plan for OTHER THAN PREVIOUSLY STATED SITE HAZARDS when planning the task?
Permits, Location, Access, Communication , Egress, Skills, PPE, Licences
55
List four (4) workplace safety information documents that you can obtain
Code of Practice, Australian Standards, Regulations, Legislation
56
If the forklift starts to roll over sideways, what two things should you do?
Do not jump out, Brace yourself until stationary.
57
List three (3) guards fitted to a forklift, and what do they protect.
Overhead guard - Protects the operator from falling objects, Foot guard - Protects the feet, Load guard - Stops the load from hitting the mast and protects the operator.
58
Do you have to renew you HRW licence? How often?
Yes, Every five years and online at Wh&SQ website
59
Why is it unsafe to refuel while the engine is running?
Fuel could ignite
60
When operating a forklift on a wet of slippery surface, what are two (2) ways you can operate safely and stay safe?
Reduce Speed, Drive cautiously, No hard braking
61
When charging batteries, why should they be charged in well-ventilated areas?
Batteries give off dangerous gases and could explode
62
What do you have to do if your HRW licence has not be renewed within 12 months of its expiry?
Retrain and sit an assessment with a Registered Training Organization as you cannot renew.
63
List four (4) things you would do if the forklift you are operating breaks down in any way.
Stop Operating, Lower forks to the ground (if possible), Tag Out, Report to an authorised person and repair before re-using.