M7C20

18問 • 2ヶ月前

ユーザ名非公開

通報

問題一覧

The word ―Check is used to describe a task to ensure that:

a condition conforms to prescribed limits.

The word ―Inspect is used to describe a task which requires :

a degree of judgement.

An aircraft maintenance program in an EU territory is approved by the :

Competent authority of EASA.

A Bonded store is one provided to store:

materials and parts which have been proved to conform to specification and are serviceable and approved for aircraft use.

To ensure continued airworthiness, each check has a mandatory Never Exceed Period (NEP). If the check is not completed by the specified time( is exceeded ):

the certificate of airworthiness is invalidated and the aircraft grounded

A Duplicate Inspection is defined as :

An inspection first made and certified by one qualified person and subsequently made and certified by a second qualified person.

Apart from the “high level” contact between the Maintenance Planners and the Operations Planners there is day-to-day contact between maintenance and operations via:

the Technical Log.

The term ‘Quality Assurance’ is used to define :

the planned actions by which the organisation can demonstrate with confidence, or guarantee, that its product or services will satisfy the quality requirements

The Quality System Any approved Part-145 organisation has a quality system consisting of two parts:

Independent audits & A quality feedback reporting system

Small operators and private owners may rely on a paperwork system with installation dates recorded in the:

aircraft Log Book.

a schedule of maintenance checks designed to ensure continuing airworthiness of the aircraft , is called:

Check Cycle.

This is performed on the ramp before every flight.

Transit Check or Pre-Flight Check.

Vital points inspections are:

components which involve duplicate inspections.

Vital points inspections are carried out:

After an area is disturbed.

A hard time engine inspection involves:

Replacement with a new or overhauled component.

A certificate of release to service must be issued after:

A repair has been carried out in accordance with an approved repair scheme.

After a mandatory inspection has been carried out by a licensed engineer , what is issued:

Certificate of release to service.

aircraft maintenance licence shall permit the holder to issue certificates of release to service following base maintenance on aircraft.

An category C

module 1 ch1

ユーザ名非公開 · 53問 · 11ヶ月前

module 1 ch1

53問 • 11ヶ月前

ユーザ名非公開

ユーザ名非公開 · 68問 · 11ヶ月前

68問 • 11ヶ月前

ユーザ名非公開

ユーザ名非公開 · 68問 · 11ヶ月前

m4 ch 2

m4 ch 2

m4 ch 3

m4 ch 3

m 4 ch 4

m 4 ch 4

M15c1

M15c1

M15c2

M15c2

M15c3

M15c3

M15c4

M15c4

M15c3

M15c3

M15c4

M15c4

M15c5

M15c5

M15c6

M15c6

M7c1

M7c1

M7c2

M7c2

M7c3

M7c3

M7c3

M7c3

M7c4

M7c4

問題一覧

The word ―Check is used to describe a task to ensure that:

a condition conforms to prescribed limits.

The word ―Inspect is used to describe a task which requires :

a degree of judgement.

An aircraft maintenance program in an EU territory is approved by the :

Competent authority of EASA.

A Bonded store is one provided to store:

materials and parts which have been proved to conform to specification and are serviceable and approved for aircraft use.

To ensure continued airworthiness, each check has a mandatory Never Exceed Period (NEP). If the check is not completed by the specified time( is exceeded ):

the certificate of airworthiness is invalidated and the aircraft grounded

A Duplicate Inspection is defined as :

An inspection first made and certified by one qualified person and subsequently made and certified by a second qualified person.

Apart from the “high level” contact between the Maintenance Planners and the Operations Planners there is day-to-day contact between maintenance and operations via:

the Technical Log.

The term ‘Quality Assurance’ is used to define :

the planned actions by which the organisation can demonstrate with confidence, or guarantee, that its product or services will satisfy the quality requirements

The Quality System Any approved Part-145 organisation has a quality system consisting of two parts:

Independent audits & A quality feedback reporting system

Small operators and private owners may rely on a paperwork system with installation dates recorded in the:

aircraft Log Book.

a schedule of maintenance checks designed to ensure continuing airworthiness of the aircraft , is called:

Check Cycle.

This is performed on the ramp before every flight.

Transit Check or Pre-Flight Check.

Vital points inspections are:

components which involve duplicate inspections.

Vital points inspections are carried out:

After an area is disturbed.

A hard time engine inspection involves:

Replacement with a new or overhauled component.

A certificate of release to service must be issued after:

A repair has been carried out in accordance with an approved repair scheme.

After a mandatory inspection has been carried out by a licensed engineer , what is issued:

Certificate of release to service.

aircraft maintenance licence shall permit the holder to issue certificates of release to service following base maintenance on aircraft.

An category C