暗記メーカー

暗記メーカー

​
ログイン
TLE PART 1
100問 • 1年前
  • ZULHAMMEEN C. SENDAD
    • 通報

    問題一覧

  • 1

    In the oblique drawing, object depth is halved for cabinet oblique, quartered for general oblique, and remains unchanged for ________ oblique.

    Cavalier

  • 2

    A mason wants to create a smooth finish of concrete after floating. Which tool is appropriate?

    Concrete trowel

  • 3

    Why is it essential for businesses to understand probability distributions?

    To accurately assess and manage risks

  • 4

    Magnetic flux density is a measure of the strength of a magnetic field, typically symbolized by the letter B. What is the SI unit of magnetic flux density?

    Tesla

  • 5

    Which law states that the magnetic flux through a closed surface is zero?

    Gauss's Law for Magnetism

  • 6

    What is the direction of the magnetic field inside a long, straight current-carrying conductor?

    Along the conductor in the direction of the current.

  • 7

    Which of the following materials exhibits the strongest magnetic properties?

    Iron

  • 8

    What happens to the resistance of a wire when it is placed in a magnetic field perpendicular to the current flowing through it?

    Increases

  • 9

    What is the primary ingredient in the traditional Italian dish, "Risotto?"

    Rice

  • 10

    According to Lenz's Law, the direction of the induced electromotive force (EMF) in a circuit is such that it opposes _________.

    The change in magnetic flux

  • 11

    Which government agency in the Philippines is responsible for enforcing food safety regulations?

    Food and Drug Administration (FDA)

  • 12

    What is the relationship between the frequency of the alternating current (AC) and the frequency of the magnetic field produced?

    Directly proportional

  • 13

    How does globalization impact the prospects of industrial arts in economic growth?

    It fosters innovation and collaboration

  • 14

    Which of the following is a good source of lean protein?

    Tofu

  • 15

    In a transformer, if the number of turns in the primary coil is greater than the number of turns in the secondary coil, the output voltage is _________.

    Lower than the input voltage

  • 16

    What type of electromagnetic radiation has the shortest wavelength?

    Gamma rays

  • 17

    What phenomenon occurs when a magnetic material becomes magnetized in the direction of an external magnetic field and retains some of its magnetization after the field is removed?

    Ferromagnetism

  • 18

    Which of the following is NOT a characteristic of freehand drawing?

    Use of drafting tools

  • 19

    Which tool is commonly used in mechanical but not freehand drawing?

    T-square

  • 20

    A T-square in mechanical drawing is a tool consisting of a long ruler with a perpendicular crosspiece at one end. What is the primary purpose of a T-square in mechanical drawing?

    To draw straight line

  • 21

    Which of the following drawing techniques is more forgiving of mistakes?

    Freehand drawing

  • 22

    What does "isometric" refer to in mechanical drawing?

    A method for creating 3D drawings on a 2D surface

  • 23

    Which of the following is a common method for achieving shading effects in freehand drawing?

    Cross-hatching

  • 24

    What is the purpose of an eraser shield in mechanical drawing?

    To create precise erasures

  • 25

    What type of joint is commonly used in plumbing to connect two pipes end to end?

    Threaded joint

  • 26

    Which type of drawing typically requires more attention to proportion and scale?

    Mechanical drawing

  • 27

    Business owners can make informed decisions if they know the break-even point. What does the break-even point represent? The point at which _________.

    Total revenue equals total expenses

  • 28

    Which of the following is an advantage of mechanical drawing over freehand drawing?

    It is faster for producing precise technical drawings

  • 29

    Which drawing technique involves using a stylus or pen on a digital tablet?

    Computer-aided drafting (CAD)

  • 30

    What is a ruler's purpose in freehand and mechanical drawing?

    To create straight lines

  • 31

    Which of the following is NOT a requirement for food storage by sanitation laws? Storing ___________.

    Raw meats above cooked foods

  • 32

    Mechanical drawing is a detailed visual representation of mechanical components used in engineering and manufacturing to communicate design specifications. What is a common tool used in freehand and mechanical drawing?

    Eraser

  • 33

    What does "gesture drawing" refer to in freehand drawing?

    Drawing quickly to capture the overall movement of a subject

  • 34

    Architectural blueprints and engineering diagrams are detailed plans and schematics used in construction and design processes. Which type of drawing is typically used for architectural blueprints and engineering diagrams?

    Mechanical drawing

  • 35

    What is the primary purpose of a compass in mechanical drawing?

    To create precise circles and arcs

  • 36

    Templates and stencils are pre-designed patterns or outlines for replicating shapes or designs onto surfaces. Which type of drawing typically requires templates and stencils?

    Mechanical drawing

  • 37

    What is the purpose of using grids in drawing?

    To help with proportions and scaling

  • 38

    Which of the following drawing techniques is commonly used for technical illustrations?

    Mechanical drawing

  • 39

    Smudge graphite blends graphite pencil marks on paper to create shading or soft transitions. Which tool is commonly used in freehand drawing to blend or smudge graphite?

    Blender stump

  • 40

    Freehand drawing is the creation of images or designs without guiding tools or aids, relying solely on the artist's hand and eye coordination. What is the primary advantage of freehand drawing over mechanical drawing?

    Creativity

  • 41

    Orthographic projection is a method of representing three-dimensional objects in two-dimensional features onto a flat surface without distortion. What is orthographic projection?

    A method of representing 3D objects in 2D using parallel projectors

  • 42

    Which of the following is an example of a fixed cost?

    Rent

  • 43

    Which of the following is a requirement for food handlers by sanitation laws?

    Proper hand-washing practices

  • 44

    What is the primary purpose of food preservation techniques?

    Extending shelf life

  • 45

    Which of the following best describes isometric drawing?

    A drawing technique that uses equal angles to represent three dimensions

  • 46

    How many views are typically used to represent an object in orthographic projection?

    Three

  • 47

    Which of the following types of lines are used in orthographic projection to represent hidden edges or lines?

    Dashed lines

  • 48

    What is the purpose of an isometric grid when creating an isometric drawing?

    To maintain the correct angles for isometric projection

  • 49

    What angle is typically used between the three axes in an isometric drawing?

    120 degrees

  • 50

    It applies to standardized multiple-line weights used to emphasize or de-emphasize areas of a drawing to ensure a uniform interpretation of drawings.

    Alphabet of lines

  • 51

    The most commonly used in college diplomas is ____________ of the various styles of letters.

    Roman

  • 52

    What is the purpose of orthographic projection in engineering and design?

    To accurately represent the size and shape of objects

  • 53

    When creating an isometric drawing, which of the following should be consistent across all axes?

    Length

  • 54

    Carlo's desire to help the community and government establish a business will focus on employing several workers and approximate annual amount paid by the project and the workers to the government. Carlo's contribution will be ___________.

    Salary and taxes

  • 55

    What is the term for a joint where two pieces of wood are joined at a right angle in carpentry?

    Butt joint

  • 56

    Job rotations fosters employee skill development, engagement and knowledge sharing while aiding succession planning and reducing burnout. Based on this definition, what is job rotation?

    Moving employees through different jobs to develop their skills

  • 57

    In orthographic projection, what is the purpose of the top view? To show the _________.

    Height and width of an object

  • 58

    Sometimes, light vertical guidelines are put in to help space the letters during the ________ stage of the lettering experience.

    Early

  • 59

    What kind of drawing is much like sketching?

    Freehand

  • 60

    Which of the following is true regarding orthographic projection views?

    The top view shows the width and height of an object

  • 61

    Which of the following using dashed lines to represent hidden edges?

    Orthographic projection

  • 62

    What is the primary advantage of isometric drawing over perspective drawing? Isometric drawing ________.

    Represents size and shape of objects

  • 63

    What technology program can a designer use to conceptualize objects more efficiently without spending costly illustrations, models, or prototypes?

    Computer aided designing

  • 64

    Which of the following foods is high in antioxidants?

    Spinach

  • 65

    Which of the following is a characteristic of orthographic projection? It requires, shows, and uses __________.

    Parallel projections

  • 66

    In an orthographic projection, which view typically shows the most detail?

    Front view

  • 67

    Which of the following accurately describes the differences between isometric and oblique projection? Isometric projection ______________.

    Shows all three dimensions equally, while oblique projection exaggerates one dimension

  • 68

    In orthographic projection, which view shows an objects shape and size?

    Front view

  • 69

    Which of the following is not a common type of organizational structure?

    Circular

  • 70

    The principle that no one in an organization should have more than one boss is known as ___________.

    Unity of Command

  • 71

    The term "fiduciary responsibility" refers to ________.

    Duty to act in others best interest

  • 72

    In a matrix organizational structure, employees __________.

    Report to multiple managers

  • 73

    Which management function involves setting objectives and determining a course of action?

    Planning

  • 74

    The process of dividing work into separate jobs that different people perform is called _________.

    Specialization

  • 75

    A flat organizational structure is where there are few or no levels of middle management between the staff and the executives, promoting a more decentralized decision making process. Which best describes a flat organizational structure?

    Few levels of management

  • 76

    Which term refers to how much decision making authority is concentrated at higher organizational levels?

    Centralization

  • 77

    What is the primary advantage of a functional organizational structure?

    Clear career paths within functions

  • 78

    Monitoring, comparing, and correcting work performance is known as ___________.

    Controlling

  • 79

    Which of the following is true about Seed Flaking in Pre-press Solvent Extraction? The flakes ___________.

    Must be an optimum size

  • 80

    Which of the following principles emphasizes the importance of having a clear and unbroken line of authority?

    Chain of Command

  • 81

    Which structures are employees grouped by products, services, customers, or geographic locations?

    Divisional

  • 82

    What term describes a system where each employee is given a specific role and tasks to perform?

    Specialization

  • 83

    The degree to which organizational jobs are standardized is referred to as ___________.

    Formalization

  • 84

    A formal, written set of organizational rules and policies is known as ___________

    Organizational Manual

  • 85

    What theory emphasizes the importance of understanding human behaviors and attitudes in the workplace?

    Behavioral Management Theory

  • 86

    The principles that states that a manager should be responsible for the work of their subordinates is called ________.

    Responsibility

  • 87

    A diagram that visually shows the structure of an organization, including the relationships and relative ranks of its parts and positions or jobs, is called __________.

    Organizational Chart

  • 88

    Why are assets and liabilities important in recording transactions?

    They facilitate business operations and profitability

  • 89

    Which management function motivates and leads employees to achieve organizational goals?

    Leading

  • 90

    Which of the following is a key characteristic of a bureaucratic organizational structure?

    Rigid rules and regulations

  • 91

    Organizational structure refers to the framework that defines an organization's hierarchy, roles, responsibilities and relationships. What is the main purpose of having clear organizational structure?

    To define roles and responsibilities

  • 92

    Which of the following statements is correct?

    A bigger wire size has lower resistance

  • 93

    The National Plumbing Code on soil provides at least one vertical stack in the plumbing system that extends full size through the rock for the following purposes except one. Which is it?

    To enhance the siphoning of the water

  • 94

    The extent to which employees can make decisions without supervision is known as _________.

    Autonomy

  • 95

    The following are the proper methods for cleaning food contact surfaces, except for ________.

    Using a dry cloth

  • 96

    Which organizational structure best suits an organization with a diverse product line?

    Divisional

  • 97

    The principle that suggests that managers should have limited number of people reporting directly to them is known as ________.

    Span of Control

  • 98

    Which of the following best describes decentralization?

    Delegations of decision making authority to lower levels

  • 99

    Which type of organizational structure combines aspects of both functional and divisional structures?

    Matrix

  • 100

    Which of the following is NOT a typical component of a home security system?

    Leaving doors unlocked

    • Problem Solving

    Problem Solving

    ZULHAMMEEN C. SENDAD · 23問 · 3年前

    Problem Solving

    Problem Solving

    23問 • 3年前
    ZULHAMMEEN C. SENDAD

    CSE General Information

    CSE General Information

    ZULHAMMEEN C. SENDAD · 35問 · 3年前

    CSE General Information

    CSE General Information

    35問 • 3年前
    ZULHAMMEEN C. SENDAD

    Table

    Table

    ZULHAMMEEN C. SENDAD · 7問 · 3年前

    Table

    Table

    7問 • 3年前
    ZULHAMMEEN C. SENDAD

    Algebraic Expression / Translation

    Algebraic Expression / Translation

    ZULHAMMEEN C. SENDAD · 12問 · 3年前

    Algebraic Expression / Translation

    Algebraic Expression / Translation

    12問 • 3年前
    ZULHAMMEEN C. SENDAD

    PREVIOUS LEA EXAM

    PREVIOUS LEA EXAM

    ZULHAMMEEN C. SENDAD · 240問 · 4年前

    PREVIOUS LEA EXAM

    PREVIOUS LEA EXAM

    240問 • 4年前
    ZULHAMMEEN C. SENDAD

    Reading Comprehension

    Reading Comprehension

    ZULHAMMEEN C. SENDAD · 19問 · 3年前

    Reading Comprehension

    Reading Comprehension

    19問 • 3年前
    ZULHAMMEEN C. SENDAD

    Identifying Error

    Identifying Error

    ZULHAMMEEN C. SENDAD · 22問 · 3年前

    Identifying Error

    Identifying Error

    22問 • 3年前
    ZULHAMMEEN C. SENDAD

    Phil. Constitutions, Human Rights & R.A. 6713

    Phil. Constitutions, Human Rights & R.A. 6713

    ZULHAMMEEN C. SENDAD · 38問 · 3年前

    Phil. Constitutions, Human Rights & R.A. 6713

    Phil. Constitutions, Human Rights & R.A. 6713

    38問 • 3年前
    ZULHAMMEEN C. SENDAD

    Paragraph Organization

    Paragraph Organization

    ZULHAMMEEN C. SENDAD · 10問 · 3年前

    Paragraph Organization

    Paragraph Organization

    10問 • 3年前
    ZULHAMMEEN C. SENDAD

    Number Analogy

    Number Analogy

    ZULHAMMEEN C. SENDAD · 9問 · 3年前

    Number Analogy

    Number Analogy

    9問 • 3年前
    ZULHAMMEEN C. SENDAD

    Sentence Structure (Grammar & Correct Usage)

    Sentence Structure (Grammar & Correct Usage)

    ZULHAMMEEN C. SENDAD · 14問 · 3年前

    Sentence Structure (Grammar & Correct Usage)

    Sentence Structure (Grammar & Correct Usage)

    14問 • 3年前
    ZULHAMMEEN C. SENDAD

    Logical Analysis (Assumption)

    Logical Analysis (Assumption)

    ZULHAMMEEN C. SENDAD · 10問 · 3年前

    Logical Analysis (Assumption)

    Logical Analysis (Assumption)

    10問 • 3年前
    ZULHAMMEEN C. SENDAD

    Vocabulary

    Vocabulary

    ZULHAMMEEN C. SENDAD · 8問 · 3年前

    Vocabulary

    Vocabulary

    8問 • 3年前
    ZULHAMMEEN C. SENDAD

    Sentence Completion

    Sentence Completion

    ZULHAMMEEN C. SENDAD · 12問 · 3年前

    Sentence Completion

    Sentence Completion

    12問 • 3年前
    ZULHAMMEEN C. SENDAD

    Word Analogy

    Word Analogy

    ZULHAMMEEN C. SENDAD · 32問 · 3年前

    Word Analogy

    Word Analogy

    32問 • 3年前
    ZULHAMMEEN C. SENDAD

    PENOLOGY EXAMINATION

    PENOLOGY EXAMINATION

    ZULHAMMEEN C. SENDAD · 55問 · 3年前

    PENOLOGY EXAMINATION

    PENOLOGY EXAMINATION

    55問 • 3年前
    ZULHAMMEEN C. SENDAD

    CSE General Information

    CSE General Information

    ZULHAMMEEN C. SENDAD · 8問 · 3年前

    CSE General Information

    CSE General Information

    8問 • 3年前
    ZULHAMMEEN C. SENDAD

    問題一覧

  • 1

    In the oblique drawing, object depth is halved for cabinet oblique, quartered for general oblique, and remains unchanged for ________ oblique.

    Cavalier

  • 2

    A mason wants to create a smooth finish of concrete after floating. Which tool is appropriate?

    Concrete trowel

  • 3

    Why is it essential for businesses to understand probability distributions?

    To accurately assess and manage risks

  • 4

    Magnetic flux density is a measure of the strength of a magnetic field, typically symbolized by the letter B. What is the SI unit of magnetic flux density?

    Tesla

  • 5

    Which law states that the magnetic flux through a closed surface is zero?

    Gauss's Law for Magnetism

  • 6

    What is the direction of the magnetic field inside a long, straight current-carrying conductor?

    Along the conductor in the direction of the current.

  • 7

    Which of the following materials exhibits the strongest magnetic properties?

    Iron

  • 8

    What happens to the resistance of a wire when it is placed in a magnetic field perpendicular to the current flowing through it?

    Increases

  • 9

    What is the primary ingredient in the traditional Italian dish, "Risotto?"

    Rice

  • 10

    According to Lenz's Law, the direction of the induced electromotive force (EMF) in a circuit is such that it opposes _________.

    The change in magnetic flux

  • 11

    Which government agency in the Philippines is responsible for enforcing food safety regulations?

    Food and Drug Administration (FDA)

  • 12

    What is the relationship between the frequency of the alternating current (AC) and the frequency of the magnetic field produced?

    Directly proportional

  • 13

    How does globalization impact the prospects of industrial arts in economic growth?

    It fosters innovation and collaboration

  • 14

    Which of the following is a good source of lean protein?

    Tofu

  • 15

    In a transformer, if the number of turns in the primary coil is greater than the number of turns in the secondary coil, the output voltage is _________.

    Lower than the input voltage

  • 16

    What type of electromagnetic radiation has the shortest wavelength?

    Gamma rays

  • 17

    What phenomenon occurs when a magnetic material becomes magnetized in the direction of an external magnetic field and retains some of its magnetization after the field is removed?

    Ferromagnetism

  • 18

    Which of the following is NOT a characteristic of freehand drawing?

    Use of drafting tools

  • 19

    Which tool is commonly used in mechanical but not freehand drawing?

    T-square

  • 20

    A T-square in mechanical drawing is a tool consisting of a long ruler with a perpendicular crosspiece at one end. What is the primary purpose of a T-square in mechanical drawing?

    To draw straight line

  • 21

    Which of the following drawing techniques is more forgiving of mistakes?

    Freehand drawing

  • 22

    What does "isometric" refer to in mechanical drawing?

    A method for creating 3D drawings on a 2D surface

  • 23

    Which of the following is a common method for achieving shading effects in freehand drawing?

    Cross-hatching

  • 24

    What is the purpose of an eraser shield in mechanical drawing?

    To create precise erasures

  • 25

    What type of joint is commonly used in plumbing to connect two pipes end to end?

    Threaded joint

  • 26

    Which type of drawing typically requires more attention to proportion and scale?

    Mechanical drawing

  • 27

    Business owners can make informed decisions if they know the break-even point. What does the break-even point represent? The point at which _________.

    Total revenue equals total expenses

  • 28

    Which of the following is an advantage of mechanical drawing over freehand drawing?

    It is faster for producing precise technical drawings

  • 29

    Which drawing technique involves using a stylus or pen on a digital tablet?

    Computer-aided drafting (CAD)

  • 30

    What is a ruler's purpose in freehand and mechanical drawing?

    To create straight lines

  • 31

    Which of the following is NOT a requirement for food storage by sanitation laws? Storing ___________.

    Raw meats above cooked foods

  • 32

    Mechanical drawing is a detailed visual representation of mechanical components used in engineering and manufacturing to communicate design specifications. What is a common tool used in freehand and mechanical drawing?

    Eraser

  • 33

    What does "gesture drawing" refer to in freehand drawing?

    Drawing quickly to capture the overall movement of a subject

  • 34

    Architectural blueprints and engineering diagrams are detailed plans and schematics used in construction and design processes. Which type of drawing is typically used for architectural blueprints and engineering diagrams?

    Mechanical drawing

  • 35

    What is the primary purpose of a compass in mechanical drawing?

    To create precise circles and arcs

  • 36

    Templates and stencils are pre-designed patterns or outlines for replicating shapes or designs onto surfaces. Which type of drawing typically requires templates and stencils?

    Mechanical drawing

  • 37

    What is the purpose of using grids in drawing?

    To help with proportions and scaling

  • 38

    Which of the following drawing techniques is commonly used for technical illustrations?

    Mechanical drawing

  • 39

    Smudge graphite blends graphite pencil marks on paper to create shading or soft transitions. Which tool is commonly used in freehand drawing to blend or smudge graphite?

    Blender stump

  • 40

    Freehand drawing is the creation of images or designs without guiding tools or aids, relying solely on the artist's hand and eye coordination. What is the primary advantage of freehand drawing over mechanical drawing?

    Creativity

  • 41

    Orthographic projection is a method of representing three-dimensional objects in two-dimensional features onto a flat surface without distortion. What is orthographic projection?

    A method of representing 3D objects in 2D using parallel projectors

  • 42

    Which of the following is an example of a fixed cost?

    Rent

  • 43

    Which of the following is a requirement for food handlers by sanitation laws?

    Proper hand-washing practices

  • 44

    What is the primary purpose of food preservation techniques?

    Extending shelf life

  • 45

    Which of the following best describes isometric drawing?

    A drawing technique that uses equal angles to represent three dimensions

  • 46

    How many views are typically used to represent an object in orthographic projection?

    Three

  • 47

    Which of the following types of lines are used in orthographic projection to represent hidden edges or lines?

    Dashed lines

  • 48

    What is the purpose of an isometric grid when creating an isometric drawing?

    To maintain the correct angles for isometric projection

  • 49

    What angle is typically used between the three axes in an isometric drawing?

    120 degrees

  • 50

    It applies to standardized multiple-line weights used to emphasize or de-emphasize areas of a drawing to ensure a uniform interpretation of drawings.

    Alphabet of lines

  • 51

    The most commonly used in college diplomas is ____________ of the various styles of letters.

    Roman

  • 52

    What is the purpose of orthographic projection in engineering and design?

    To accurately represent the size and shape of objects

  • 53

    When creating an isometric drawing, which of the following should be consistent across all axes?

    Length

  • 54

    Carlo's desire to help the community and government establish a business will focus on employing several workers and approximate annual amount paid by the project and the workers to the government. Carlo's contribution will be ___________.

    Salary and taxes

  • 55

    What is the term for a joint where two pieces of wood are joined at a right angle in carpentry?

    Butt joint

  • 56

    Job rotations fosters employee skill development, engagement and knowledge sharing while aiding succession planning and reducing burnout. Based on this definition, what is job rotation?

    Moving employees through different jobs to develop their skills

  • 57

    In orthographic projection, what is the purpose of the top view? To show the _________.

    Height and width of an object

  • 58

    Sometimes, light vertical guidelines are put in to help space the letters during the ________ stage of the lettering experience.

    Early

  • 59

    What kind of drawing is much like sketching?

    Freehand

  • 60

    Which of the following is true regarding orthographic projection views?

    The top view shows the width and height of an object

  • 61

    Which of the following using dashed lines to represent hidden edges?

    Orthographic projection

  • 62

    What is the primary advantage of isometric drawing over perspective drawing? Isometric drawing ________.

    Represents size and shape of objects

  • 63

    What technology program can a designer use to conceptualize objects more efficiently without spending costly illustrations, models, or prototypes?

    Computer aided designing

  • 64

    Which of the following foods is high in antioxidants?

    Spinach

  • 65

    Which of the following is a characteristic of orthographic projection? It requires, shows, and uses __________.

    Parallel projections

  • 66

    In an orthographic projection, which view typically shows the most detail?

    Front view

  • 67

    Which of the following accurately describes the differences between isometric and oblique projection? Isometric projection ______________.

    Shows all three dimensions equally, while oblique projection exaggerates one dimension

  • 68

    In orthographic projection, which view shows an objects shape and size?

    Front view

  • 69

    Which of the following is not a common type of organizational structure?

    Circular

  • 70

    The principle that no one in an organization should have more than one boss is known as ___________.

    Unity of Command

  • 71

    The term "fiduciary responsibility" refers to ________.

    Duty to act in others best interest

  • 72

    In a matrix organizational structure, employees __________.

    Report to multiple managers

  • 73

    Which management function involves setting objectives and determining a course of action?

    Planning

  • 74

    The process of dividing work into separate jobs that different people perform is called _________.

    Specialization

  • 75

    A flat organizational structure is where there are few or no levels of middle management between the staff and the executives, promoting a more decentralized decision making process. Which best describes a flat organizational structure?

    Few levels of management

  • 76

    Which term refers to how much decision making authority is concentrated at higher organizational levels?

    Centralization

  • 77

    What is the primary advantage of a functional organizational structure?

    Clear career paths within functions

  • 78

    Monitoring, comparing, and correcting work performance is known as ___________.

    Controlling

  • 79

    Which of the following is true about Seed Flaking in Pre-press Solvent Extraction? The flakes ___________.

    Must be an optimum size

  • 80

    Which of the following principles emphasizes the importance of having a clear and unbroken line of authority?

    Chain of Command

  • 81

    Which structures are employees grouped by products, services, customers, or geographic locations?

    Divisional

  • 82

    What term describes a system where each employee is given a specific role and tasks to perform?

    Specialization

  • 83

    The degree to which organizational jobs are standardized is referred to as ___________.

    Formalization

  • 84

    A formal, written set of organizational rules and policies is known as ___________

    Organizational Manual

  • 85

    What theory emphasizes the importance of understanding human behaviors and attitudes in the workplace?

    Behavioral Management Theory

  • 86

    The principles that states that a manager should be responsible for the work of their subordinates is called ________.

    Responsibility

  • 87

    A diagram that visually shows the structure of an organization, including the relationships and relative ranks of its parts and positions or jobs, is called __________.

    Organizational Chart

  • 88

    Why are assets and liabilities important in recording transactions?

    They facilitate business operations and profitability

  • 89

    Which management function motivates and leads employees to achieve organizational goals?

    Leading

  • 90

    Which of the following is a key characteristic of a bureaucratic organizational structure?

    Rigid rules and regulations

  • 91

    Organizational structure refers to the framework that defines an organization's hierarchy, roles, responsibilities and relationships. What is the main purpose of having clear organizational structure?

    To define roles and responsibilities

  • 92

    Which of the following statements is correct?

    A bigger wire size has lower resistance

  • 93

    The National Plumbing Code on soil provides at least one vertical stack in the plumbing system that extends full size through the rock for the following purposes except one. Which is it?

    To enhance the siphoning of the water

  • 94

    The extent to which employees can make decisions without supervision is known as _________.

    Autonomy

  • 95

    The following are the proper methods for cleaning food contact surfaces, except for ________.

    Using a dry cloth

  • 96

    Which organizational structure best suits an organization with a diverse product line?

    Divisional

  • 97

    The principle that suggests that managers should have limited number of people reporting directly to them is known as ________.

    Span of Control

  • 98

    Which of the following best describes decentralization?

    Delegations of decision making authority to lower levels

  • 99

    Which type of organizational structure combines aspects of both functional and divisional structures?

    Matrix

  • 100

    Which of the following is NOT a typical component of a home security system?

    Leaving doors unlocked