暗記メーカー

暗記メーカー

​
ログイン

SEAM 1

SEAM 1
25問 • 1年前
  • Vaper Namit
    • 通報

    問題一覧

  • 1

    What are used to lift and Cary the safe working load on a ship and these are electrically or hydraulically operated equipment for easier operations?

    Derrick or Crane

  • 2

    It is a part of the ship that is used most for holding and securing major ships part.

    Forecastle

  • 3

    It is a part of the ships that stands for the part of the ships hull located above the waterlines.

    freeboard

  • 4

    Which of the following statement describe the engine room?

    its key role is to hold all the key and machinery and auxiliaries required for different operations

  • 5

    These are the three main parts of the ship

    Navigation bridge, Hull, Engine room

  • 6

    What is the main function of a propellers?

    To provide much needed thrust to propel the ship

  • 7

    How many seconds does it require for a steering gear to movr from 35 degree on one side to 30 degree

    not more than 28 seconds

  • 8

    This is a WATERTIGHT BODY of a vessel which kany be open or may be partially covered with a deck

    hull

  • 9

    He is acting on behalf of the ship's owner.

    master

  • 10

    It is a mooring lines leading ashore from the fore-end or forecastle of a ship, often at an angle about 45 degrees to the fore and aft line.

    headline

  • 11

    It is the maximum safe force that a piece of lifting equipment, lifting Device or accessory can exert to lift, suspend or lower, a given mass without fesr of breaking

    safe working load

  • 12

    It means lowering the anchor by its gravity

    letting go

  • 13

    It means lowering the anchor with gear

    walking back

  • 14

    What is the most important aspect of anchoring operations

    proper and efficient communication between the bridge and the anchor station

  • 15

    The strength of rope depends upon the_______

    the size (diameter)

  • 16

    What are the PPE to used during mooring operation?

    helmet, safety shoes,gloves

  • 17

    Which of the following are the correct actions of crew member during mooring operation?

    as much as possible,stand behind the warping end when handling ropes

  • 18

    It is used to bend a rope to or around an object,such as a ring ,spar,or stanchion.

    hitches

  • 19

    It is a separate vertical machinery unifr or psrt of the anchor windlass around which lines are passed, commonly used in mooring and anchoring evolutions.

    capstan

  • 20

    What is the reason why we need to avoid greasing friction washer or brake lining or anchor winch?

    This will lead to slippage of the anchor chain while stopping

  • 21

    What is the use of a cleat

    consists of a double - ended pair of horns,used for securing a line or wire

  • 22

    What is the use of a Bowline

    it is used to mske a fixed-size loop in a line quickly, is easily tied and will never slip

  • 23

    Which of the following maintenance item procedures is wrong

    Check all cargo hatches and access to holds for weather tightness. Seals should painted regularly

  • 24

    In this system the maintenance id carried out when the machinery breaks down

    Corrective maintenance system

  • 25

    Which of the following is/are steps to consider in order to csry out a successful maintenance plan?

    proposing solution

    • MARCOM

    MARCOM

    Vaper Namit · 37問 · 1年前

    MARCOM

    MARCOM

    37問 • 1年前
    Vaper Namit

    NAV 4

    NAV 4

    Vaper Namit · 25問 · 1年前

    NAV 4

    NAV 4

    25問 • 1年前
    Vaper Namit

    SEAM 7

    SEAM 7

    Vaper Namit · 25問 · 1年前

    SEAM 7

    SEAM 7

    25問 • 1年前
    Vaper Namit

    NAV 1

    NAV 1

    Vaper Namit · 30問 · 1年前

    NAV 1

    NAV 1

    30問 • 1年前
    Vaper Namit

    SEAM 2

    SEAM 2

    Vaper Namit · 15問 · 1年前

    SEAM 2

    SEAM 2

    15問 • 1年前
    Vaper Namit

    NAV 3

    NAV 3

    Vaper Namit · 24問 · 1年前

    NAV 3

    NAV 3

    24問 • 1年前
    Vaper Namit

    NAV 5

    NAV 5

    Vaper Namit · 30問 · 1年前

    NAV 5

    NAV 5

    30問 • 1年前
    Vaper Namit

    NAV 6

    NAV 6

    Vaper Namit · 25問 · 1年前

    NAV 6

    NAV 6

    25問 • 1年前
    Vaper Namit

    NAV 7

    NAV 7

    Vaper Namit · 25問 · 1年前

    NAV 7

    NAV 7

    25問 • 1年前
    Vaper Namit

    D-WATCH 1

    D-WATCH 1

    Vaper Namit · 20問 · 1年前

    D-WATCH 1

    D-WATCH 1

    20問 • 1年前
    Vaper Namit

    問題一覧

  • 1

    What are used to lift and Cary the safe working load on a ship and these are electrically or hydraulically operated equipment for easier operations?

    Derrick or Crane

  • 2

    It is a part of the ship that is used most for holding and securing major ships part.

    Forecastle

  • 3

    It is a part of the ships that stands for the part of the ships hull located above the waterlines.

    freeboard

  • 4

    Which of the following statement describe the engine room?

    its key role is to hold all the key and machinery and auxiliaries required for different operations

  • 5

    These are the three main parts of the ship

    Navigation bridge, Hull, Engine room

  • 6

    What is the main function of a propellers?

    To provide much needed thrust to propel the ship

  • 7

    How many seconds does it require for a steering gear to movr from 35 degree on one side to 30 degree

    not more than 28 seconds

  • 8

    This is a WATERTIGHT BODY of a vessel which kany be open or may be partially covered with a deck

    hull

  • 9

    He is acting on behalf of the ship's owner.

    master

  • 10

    It is a mooring lines leading ashore from the fore-end or forecastle of a ship, often at an angle about 45 degrees to the fore and aft line.

    headline

  • 11

    It is the maximum safe force that a piece of lifting equipment, lifting Device or accessory can exert to lift, suspend or lower, a given mass without fesr of breaking

    safe working load

  • 12

    It means lowering the anchor by its gravity

    letting go

  • 13

    It means lowering the anchor with gear

    walking back

  • 14

    What is the most important aspect of anchoring operations

    proper and efficient communication between the bridge and the anchor station

  • 15

    The strength of rope depends upon the_______

    the size (diameter)

  • 16

    What are the PPE to used during mooring operation?

    helmet, safety shoes,gloves

  • 17

    Which of the following are the correct actions of crew member during mooring operation?

    as much as possible,stand behind the warping end when handling ropes

  • 18

    It is used to bend a rope to or around an object,such as a ring ,spar,or stanchion.

    hitches

  • 19

    It is a separate vertical machinery unifr or psrt of the anchor windlass around which lines are passed, commonly used in mooring and anchoring evolutions.

    capstan

  • 20

    What is the reason why we need to avoid greasing friction washer or brake lining or anchor winch?

    This will lead to slippage of the anchor chain while stopping

  • 21

    What is the use of a cleat

    consists of a double - ended pair of horns,used for securing a line or wire

  • 22

    What is the use of a Bowline

    it is used to mske a fixed-size loop in a line quickly, is easily tied and will never slip

  • 23

    Which of the following maintenance item procedures is wrong

    Check all cargo hatches and access to holds for weather tightness. Seals should painted regularly

  • 24

    In this system the maintenance id carried out when the machinery breaks down

    Corrective maintenance system

  • 25

    Which of the following is/are steps to consider in order to csry out a successful maintenance plan?

    proposing solution