vMCE

49問 • 2年前

問題一覧

When restoring Linux or Unix guest OS files, which components can be used to mount the volume containing files to be restored? (CHoose 2)

Helper appliance, Helper host

Veeam Agent for Linux is installed on a server. A backup job is created on the server. The backup data will be sent to a Veeam Backup & Replication repository. A Veeam administrator wants to add the server to a different backup job. Which protection group would they find the server in?

Unmanaged

A Veeam administrator is concerned about keeping backups on site and has traditionally used tapes to create weekly offsite backups and free up storage. Recently, concerns have arisen about being able to begin recovery without waiting for the tapes to return from off site. The company is currently using Scale-out Backup Repositories. What option would satisfy the requirement and maintain the weekly offsite copy?

Move to capacity tier

A Scale-out Backup Repository with one local extent has been configured as follows. A daily VMware backup job retention is 31 days, keeping weekly GFS full backups for 14 weeks. It is Jan. 20. A file from a backup that occurred on Jan. 1 must be recovered. Where is the data?

In the capacity tier

A Scale-out Backup Repository with one local extent has been configured as follows. 12 VMware VMs are being backed up daily by a forward incremental backup job, which has a 14-day retention, creating synthetic fulls on Saturdays. After running for more than 31 days, which of the following would be accurate?

Both the performance tier and capacity tier will contain 14 to 20 days of restore points.

A Veeam backup proxy server is configured as follows. No modifications are allowed to the transport mode. When performing a restore of a thin-provisioned VMware virtual disk on an NFS data store using this proxy server, what transport mode will be used?

Direct NFS access

A company needs several VMware VMs restored back to their Fibre Channel SAN. A Veeam backup proxy is present as a VM on each ESXi host. Which transport mode will be used by default to restore these VMs?

Virtual appliance

A backup administrator must enable guest file system indexing for a backup job of a Linux file server VM. All required credentials are added to the Veeam Backup & Replication server. VMware Tools (VIX) cannot be used due to security regulations. What should be done to make it possible in the following environment?

Connect the Veeam Backup & Replication server to the VM network.

Hourly backup jobs are configured to local repositories. Daily backups must be sent from Site B to the repository on Site A. The connection between the two sites does not allow a direct backup to complete within the backup window. Veeam WAN accelerators in low bandwidth mode will be leveraged. Which Veeam components will be used in which order for the backup copy job?

Components 6 > 4 > 3 > 2

A company’s infrastructure consists of multiple VMware servers that store VMs on local storage. What proxy transport mode should be used to back up these VMs?

Virtual appliance

Which of the following Veeam components can be used to deploy the runtime during the backup process when a Linux VM running on VMware vSphere is protected using the file indexing option?

Backup & Replication server

An administrator has been tasked with creating a dynamic protection group to protect physical Linux servers. Where must the CSV file be stored?

On a local drive of the Veeam Backup Server.

When using an archive repository, when will a file from a NAS backup be moved to the archive?

When the file is deleted.

Veeam Backup & Replication has been performed as a default all-in-one installation. A single backup job has been configured for some Windows VMs. Which mount server will be used for a file-level restore on a Windows VM during this process?

The mount server configured for the repository

In Veeam Enterprise Manager, what are the default restoration permissions for the Restore Operator role?

All objects

Veeam ONE’s ____________________ provides an easy way to add tags to VMware vCenter Server objects without using the vSphere Client.

Business View

What type of information is displayed when you are using the Data Protection view in Veeam ONE Monitor?

Monitor performance of backup infrastructure components and plan capacity of backup infrastructure resources

What data sources can be connected to Veeam ONE? (Choose 2)

Microsoft System Center Virtual Machine Manager server, Veeam Enterprise Manager server

A director has asked for a report on which VMs are overprovisioned in the virtual infrastructure. Which Veeam component should be used?

Veeam ONE Web Client

The administrator of a VMware vSphere environment needs to do an application-aware backup of a PostgreSQL database on a Linux VM. In order to do this, they must:

Tick "Enable application-aware processing" in the VM backup job. No additional agents are necessary.

An administrator has decided to set up a VM backup job covering their Oracle servers. What feature must be enabled to ensure quiescence of the Oracle databases during the backup?

Enable application-aware processing.

An administrator is asked to create a dynamic group of VMs that will be backed up based on a four-hour RPO from the VMware platform. How can this be accomplished?

Create the backup job based on vSphere tags.

An hourly backup job for seven Hyper-V VMs has been configured at the main site, keeping 14 days' worth of backup files. They want to get a copy of the VM backups to a repository at the disaster recovery site. They want to keep two months' worth of backup files at the disaster recovery site. They also need to be able to restore the VMs to any given day within two months and want to minimize the storage used at disaster recovery. How should a backup copy job be configured to meet these requirements?

Use periodic copy (pruning) mode, keeping 62 days of retention.

Veeam Backup & Replication is currently configured with Veeam Backup for AWS and Azure to back up different workloads: Windows VMs on AWS to Amazon S3 external repository and Windows VMs on Azure to Microsoft Azure blob external repository. A secondary copy of all the backups must be created. Which of the following backup copy job configurations is correct?

Two "periodic copy" backup copy jobs

An administrator is asked to change a backup copy job from periodic mode to immediate mode. How can this be accomplished?

Modify the copy job settings in the console.

45 VMs are running on a Hyper-V platform at a remote office (ROBO). The administrator has been tasked with setting up a backup copy to the main office (HQ) to centralize all off-site backups. The available bandwidth is 1 Gbps. RPO is set to eight hours and the data generated for the interval is 500 GB. There are no WAN accelerators configured. Which of the following will achieve the RPO?

Configure backup copy jobs to use "direct transport path". Set interval to every eight hours.

Which agents can perform full computer backups, to enable bare metal restores? (Choose 2)

Veeam Agent for IBM AIX, Veeam Agent for Oracle Solaris

The Microsoft SQL Server on which the configuration database resides is corrupted. A backup administrator wants to deploy the configuration database on a new Microsoft SQL Server and recover data from the configuration backup. Which configuration restore mode should be used?

Restore

An infrastructure with 50 VMs has a power outage. After the VMware cluster has booted up again, three large VMs seem to be stuck in a boot loop. Assuming only the OS is installed on the VM OS disk, which method would require the least amount of backup data transferred to allow the VMs to boot?

Perform a Virtual Disk Restore with the quick rollback feature disabled.

The administrator of a VMware environment backed up by Veeam Backup & Replication has a critical server that has crashed and will not reboot. What is the fastest way to bring this server back online with the least disruption to business?

Instant Disk Recovery

A company needs to recover a VM from Nutanix AHV very quickly. The company decides to use Instant VM Recovery from their last backup. What platforms can this backup be instantly restored to? (Choose 3)

Nutanix AHV, Microsoft Hyper-V, VMware vSphere

A backup of an Oracle Linux VM running on a VMware host has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?

Issues caused by Oracle software update

A physical Linux server protected by a centrally managed Veeam agent is physically damaged. An Amazon EC2 infrastructure is available, and the physical server is eligible for virtualization. Which recovery step provides the lowest possible RTO?

Use Restore to Amazon EC2 VM.

Veeam Agent for Microsoft Windows has been installed in unmanaged mode on a Windows physical server. The backup job is configured to write to a Veeam repository. Which of the following media types is available for recovery media creation?

SD card

At 18:00, after an issue, a VM is stuck in: Error code 0xc000000f The application or operating system couldn't be loaded because a required file is missing or contains errors. The VM is configured as shown in the table. During troubleshooting, a VMware administrator found that a datastore was not available several times. The last backup was created at 01:00. Choose the recovery approach that provides the lowest RPO and least amount of data loss.

Instant Disk Recovery

After a reboot a physical Windows server shows volume E as inaccessible. It looks like the volume has been corrupted. The server has several volumes: C (OS-60GB), D (data-2TB) and E (data-600GB). Employees urgently need to access the files on this volume. Which of the following would bring the server back up and running the fastest on the same hardware?

Insert the Veeam Recovery Media and use volume restore for drive E.

A file on a Windows Server 2016 VM hosted on a Hyper-V server 2016 is corrupted and must be restored. For some reason, the Veeam mount server cannot connect to the VM through the network. Which of the following restore methods provides the best possible RTO?

Run Veeam file restore wizard and let it restore through PowerShell Direct.

A director in a business needs a folder of traffic photos restored from a virtualized Linux server, backed up by Veeam Backup & Replication. The director wants the files restored to their original location and to replace any original files still present. What functionality will be used to restore the folder using the Veeam guest OS restoration wizard?

Restore the files using the "Overwrite" function. The original files will be removed.

When restoring Linux or Unix guest OS files, which components can be used to mount the volume containing files to be restored? (Choose 2)

Helper host, Helper appliance

A database administrator is working on a PowerShell script. Due to an error, the script drops 10 tables out of 100 from the Microsoft SQL database. Veeam Explorer for Microsoft SQL will be used to restore it. Choose the option that will restore functionality with the minimum impact on user experience and RPO.

Use the "Restore database schema and data" option to perform a restore of the deleted Microsoft SQL items.

Which feature can be used in Veeam Explorer for Microsoft SharePoint?

Restore home pages

A user needs a SharePoint Document Library sent to them from a backup so that they can work directly with the documents. Using the Veeam Explorer for Microsoft SharePoint, what are the valid restore options? (Choose 2)

Save Library as .zip, Send Library

What does Veeam's Staged Restore functionality enable during restores?

Remove personal or sensitive data from VMs.

In a replica job, if both replica mapping and replica seeding are chosen, which takes precedence?

Replica mapping if a restored VM or replica is available

If a replication job is defined without modifying any settings on the schedule tab, when will the job first run?

Never

A company is replicating an application running on three Linux servers that need to boot in a specific order. During a failover, how can this be achieved?

Create a failover plan.

Which Veeam failover option can result in data loss?

Undo failover

A failover plan that includes three VMs has just completed, starting the VMs at the disaster recovery location. What next actions are available for those three VMs right now?

Undo failover, Failback, Permanent failover

Due to a power outage, Site A is completely down. The disaster recovery strategy was implemented (see diagram). What is the correct way to start replicated VMs on Site B?

Power on VMs manually through vCenter.

問題一覧

When restoring Linux or Unix guest OS files, which components can be used to mount the volume containing files to be restored? (CHoose 2)

Helper appliance, Helper host

Unmanaged

Move to capacity tier

In the capacity tier

Both the performance tier and capacity tier will contain 14 to 20 days of restore points.

Direct NFS access

Virtual appliance

Connect the Veeam Backup & Replication server to the VM network.

Components 6 > 4 > 3 > 2

A company’s infrastructure consists of multiple VMware servers that store VMs on local storage. What proxy transport mode should be used to back up these VMs?

Virtual appliance

Which of the following Veeam components can be used to deploy the runtime during the backup process when a Linux VM running on VMware vSphere is protected using the file indexing option?

Backup & Replication server

An administrator has been tasked with creating a dynamic protection group to protect physical Linux servers. Where must the CSV file be stored?

On a local drive of the Veeam Backup Server.

When using an archive repository, when will a file from a NAS backup be moved to the archive?

When the file is deleted.

The mount server configured for the repository

In Veeam Enterprise Manager, what are the default restoration permissions for the Restore Operator role?

All objects

Veeam ONE’s ____________________ provides an easy way to add tags to VMware vCenter Server objects without using the vSphere Client.

Business View

What type of information is displayed when you are using the Data Protection view in Veeam ONE Monitor?

Monitor performance of backup infrastructure components and plan capacity of backup infrastructure resources

What data sources can be connected to Veeam ONE? (Choose 2)

Microsoft System Center Virtual Machine Manager server, Veeam Enterprise Manager server

A director has asked for a report on which VMs are overprovisioned in the virtual infrastructure. Which Veeam component should be used?

Veeam ONE Web Client

The administrator of a VMware vSphere environment needs to do an application-aware backup of a PostgreSQL database on a Linux VM. In order to do this, they must:

Tick "Enable application-aware processing" in the VM backup job. No additional agents are necessary.

An administrator has decided to set up a VM backup job covering their Oracle servers. What feature must be enabled to ensure quiescence of the Oracle databases during the backup?

Enable application-aware processing.

An administrator is asked to create a dynamic group of VMs that will be backed up based on a four-hour RPO from the VMware platform. How can this be accomplished?

Create the backup job based on vSphere tags.

Use periodic copy (pruning) mode, keeping 62 days of retention.

Two "periodic copy" backup copy jobs

An administrator is asked to change a backup copy job from periodic mode to immediate mode. How can this be accomplished?

Modify the copy job settings in the console.

Configure backup copy jobs to use "direct transport path". Set interval to every eight hours.

Which agents can perform full computer backups, to enable bare metal restores? (Choose 2)

Veeam Agent for IBM AIX, Veeam Agent for Oracle Solaris

Restore

Perform a Virtual Disk Restore with the quick rollback feature disabled.

Instant Disk Recovery

Nutanix AHV, Microsoft Hyper-V, VMware vSphere

A backup of an Oracle Linux VM running on a VMware host has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?

Issues caused by Oracle software update

Use Restore to Amazon EC2 VM.

SD card

Instant Disk Recovery

Insert the Veeam Recovery Media and use volume restore for drive E.

Run Veeam file restore wizard and let it restore through PowerShell Direct.

Restore the files using the "Overwrite" function. The original files will be removed.

When restoring Linux or Unix guest OS files, which components can be used to mount the volume containing files to be restored? (Choose 2)

Helper host, Helper appliance

Use the "Restore database schema and data" option to perform a restore of the deleted Microsoft SQL items.

Which feature can be used in Veeam Explorer for Microsoft SharePoint?

Restore home pages

Save Library as .zip, Send Library

What does Veeam's Staged Restore functionality enable during restores?

Remove personal or sensitive data from VMs.

In a replica job, if both replica mapping and replica seeding are chosen, which takes precedence?

Replica mapping if a restored VM or replica is available

If a replication job is defined without modifying any settings on the schedule tab, when will the job first run?

Never

A company is replicating an application running on three Linux servers that need to boot in a specific order. During a failover, how can this be achieved?

Create a failover plan.

Which Veeam failover option can result in data loss?

Undo failover

A failover plan that includes three VMs has just completed, starting the VMs at the disaster recovery location. What next actions are available for those three VMs right now?

Undo failover, Failback, Permanent failover

Due to a power outage, Site A is completely down. The disaster recovery strategy was implemented (see diagram). What is the correct way to start replicated VMs on Site B?

Power on VMs manually through vCenter.