問題一覧
1
Why is rubrics important in making any project?
It provides a consistent and reliable means for assessing student's performance.
2
The small opening of the shears is for the when holding it in cutting thefabric
Thumb
3
What characteristics would you consider in cutting and transferring markings on the cloth?
Accuracy
4
Which of the following should be done for a project to become successful?
Drawing
5
It is made based on basic or block pattern
Style Pattern
6
Upon receiving her returned work from her teacher, Liam noticed symbols on the folded edge of the fabric of her patterns. This symbol guides the cutter to place the pattern on the folded edge of a cloth. What do you call the symbol her teacher drew on her pattern
Centerfold
7
The steps to be followed in Dressmaking are called
Procedure
8
The fabric is folded crosswise At the center With the raw edges together
off center crosswise fold
9
The line where a seam should be stitch.
Seamline
10
The garment fits perfectly, holds its shape, and hangs well. This is why there is a need to prepare the fabric first before construction to have perfect output. The following are steps in preparing the fabric before cutting it EXCEPT
Cut the fabrics right away.
11
When do you remove patterns and pins from the cloth?
After transferring marks
12
If the cost of the cloth per yard is Php55.00 and you need 2 yards for your project ladies' trousers, how much is the total cost of the cloth?
Php110.00
13
The first step in making the style pattern for ladies' trousers.
Trace the basic pattern
14
Ladies' trousers same asLadies' trousers same as
Ladies' pants
15
What if Mycel would like to use a 36 wide of material, how much fabric would she need for her pants?
2 ½ yards
16
How do you identify a pattern symbol which means that the style pattern should be laid out on the folded part of the fabric.
Three circles
17
Joshia's teacher lamented on the finished project of her class. Most seam lines ravels. Hemlines are single turned. Threads are entangled. She insists that edges must be fine. How could her students make the edges fine?
Cut with sharp shears.
18
Piece of fabric used to give body and support to garment
Interfacing
19
The client will be seated, and the dressmaker will take the measurement at the side, from the waist down to the chair seat. Which type of measurement is being measured by the dressmaker?
rise measurement
20
It is a fold and sewn into fabric to take in ease and provide shape to a garment
Collar
21
The fabric is folded lengthwise at the center with salvages together
lengthwise centerfold
22
The fabric is folded crosswise with the raw edges meeting at the center
crosswise centerfold
23
It is running at right angle or perpendicular to the selvage
Bias thread
24
Mycel has a tall figure. She decided to use a 60"wide fabric for her pants. How much fabric will she need?
1 1/2 yards
25
Why is it important to identify the grainlines of the fabric in laying out patterns on it?
Transferring of marks onto the fabric conforms to the grainlines.
26
It is one of the most popular types of pockets, it can be found on garments of all kinds.
Unlined patch pocket
27
An outer garment covering the body from the waist to ankles
Trousers
28
What body measurements are needed in drafting the pants?
Waist circumference
29
Why should your client observe proper posture when taking body measurements?
To ensure body measurements
30
The style of trousers which can fit any body type.
Straight Leg Trouser
31
A small bag inserted in or attached to a garment.
32
Which of the following measuring devices is used to add measurements on the basic pattern of the body?
Tape Measure
33
The fabric is folded Lengthwise with the edges Meeting at the center
off center lengthwise fold
34
What marking tool is used for transferring marks on the cloth?
Dressmaker's carbon paper and Tracing wheel
35
It is a type of cloth that has the following characteristics in absorbency, heat conduction, strength, and beauty
cotton
36
Press the creases before basting the garment together. What marking process is used in the narration?
Pressing
37
The opening of this pocket is along the side seam of the garments
Seam pocket
38
Which of the following prints of materials would make laying out of a pattern difficult?
Checkered
39
Keith has a small figure. She decided to use a 60"wide fabric for her ladies' trousers. How much fabric will she need?
1 ¼ yards
40
When drafting a basic pattern, it is best to get the accurate measurement so it is best for the client to wear
All of the above
41
Pattern bearing the style and with allowances
Style Pattern
42
Cut the waistband exactly on grain, twice the width of the grosgrain plus ¼inch, and 5 inches longer than the waist measurement. The waistband in plaid fabrics may be cut either on the lengthwise or on the crosswise grain, depending on the design. What cutting technique is discussed?
Cutting the waistband
43
Which of the following are used in drafting the pattern?
Pencil and tape measure
44
Transferring of marks onto the fabric conforms to the grainlines.
45
When do you cut the patterns?
After pinning the pattern
46
The part of the project plan which contains the process and activity in doing Project ladies' trousers
Procedure
47
Dart location is best transferred using
Pin