暗記メーカー

暗記メーカー

​
ログイン

Support Tech Test

Support Tech Test
49問 • 2年前
  • ユーザ名非公開
    • 通報

    問題一覧

  • 1

    When operating a bench grinder you should always use what?

    Eye protection

  • 2

    How many cycles does a windshield wiper have to go through to be considered clear?

    5

  • 3

    What is a hacksaw used for?

    Cut Metal

  • 4

    what does an amphere do?

    Rate of current flow through a conductor

  • 5

    what does a feeler gauge do?

    Measures the distance between two parts.

  • 6

    What does a tap do?

    to thread a hole.

  • 7

    what is a spindle?

    A rod for spinning and twisting.

  • 8

    What is a multimeter used for?

    a device used to measure voltage, resistance, and current in electronics and electrical equipment.

  • 9

    What is a hydrometer?

    instrument used to determine specific gravity or liquids.

  • 10

    what is voltage?

    force that causes electrons to flow.

  • 11

    A24 volt system joins two batteries wired in parallel is still a 12 volt system?

    True

  • 12

    Two or more batteries wired in series develops 24 volts though Ampherage doesn’t change?

    True

  • 13

    What is the correct tread depth for the front tires of a Gillig?

    6/32nds

  • 14

    What is the correct tread depth of the Rear tires of a Gillig?

    4/32nds

  • 15

    What is the correct tread depth for the front tires in the WINTER season according to CDTA?

    8/32nds

  • 16

    Coolant mixed with transmission fluid creates a:

    Light brown milky color

  • 17

    Transmission fluid should be dark red?

    True

  • 18

    According to NYSDOT it should not take more than _ passs for the windshield wipers to clean your windshield?

    5

  • 19

    When you grease an component, you should always _ the zerk fitting before and after greasing?

    Clean

  • 20

    When applying the service break, you should not lose more than _ psi per minute?

    3

  • 21

    When taking an oil analysis it is best to retrieve oil from the pan at the _ of the oil drain?

    middle

  • 22

    Wgat is the correct regulator setting on an odyssey batteries?

    29 volts

  • 23

    When wiring the coolant refractometer, a 50/50 mixture of concentrated coolant and water will give you a protection of?

    -34%

  • 24

    It is best to grease all grease or components before checking them for wear?

    False

  • 25

    The coolant torque on the Gillig hybrid transmission Lube-Filter cover bolts?

    18-21 ft lbs

  • 26

    What fluid filters are needed for a 24K inspection?

    Oil, Coolant, Fuel filters

  • 27

    When an automatic slack adjuster exceeds its travel, it is recommended practice to adjust it back to its correct measurement before returning bus to denser ice?

    True

  • 28

    When losing air pressure the low air dash light and buzzer will activate at:

    60 psi

  • 29

    When checking air pressure in a tire and the pressure is 70 psi or below it should be considered a flat?

    True

  • 30

    When checking the state of a fully charged battery with a hydrometer the electric current should be between:

    1.260 - 1.280

  • 31

    When is it best to record the oil pressure reading and check the transmission of the bus?

    When the transmission and engine are at operating temperature.

  • 32

    According to CDTA standards a dripping liquid such as (fuel, oil, coolant) component is classified as what number?

    1

  • 33

    When checking slack adjuster travel you should be sure to have at least _ pressure in your tanks.

    90-100 pds

  • 34

    When a battery cell is completely empty you should:

    condem the battery

  • 35

    According to CDTA standards what is the correct tire tread depth minimum for rear tires in the summer season?

    4/32nds

  • 36

    A rust trail on any metal component or frame is an indication of what?

    something is broken or cracked

  • 37

    A feathery edged wear pattern on the front tires is probably caused by?

    A wrong tow in adjustment

  • 38

    When draining all air tanks and containments such as water and oil are released is a good indication of what?

    all of the above

  • 39

    In the winter season you should add 8oz of:

    BLA Brake Line Antifreeze

  • 40

    The correct lug nut torque valve in most larger buses is?

    450-500 ft lbs.

  • 41

    how many volts does an 8D battery charge at?

    28 volts

  • 42

    A battery is 36% Acid

    True

  • 43

    A battery is 64% water?

    True

  • 44

    What makes up electricity?

    Source, Load, Ground

  • 45

    what is a Refractometer used for?

    to test coolant.

  • 46

    How many volts is a battery at full charge?

    12.6 volts

  • 47

    Protons create a positive charge:

    True

  • 48

    Electrons create a negative charge?

    True

  • 49

    A neutron is neutral:

    True

    • 問題一覧

  • 1

    When operating a bench grinder you should always use what?

    Eye protection

  • 2

    How many cycles does a windshield wiper have to go through to be considered clear?

    5

  • 3

    What is a hacksaw used for?

    Cut Metal

  • 4

    what does an amphere do?

    Rate of current flow through a conductor

  • 5

    what does a feeler gauge do?

    Measures the distance between two parts.

  • 6

    What does a tap do?

    to thread a hole.

  • 7

    what is a spindle?

    A rod for spinning and twisting.

  • 8

    What is a multimeter used for?

    a device used to measure voltage, resistance, and current in electronics and electrical equipment.

  • 9

    What is a hydrometer?

    instrument used to determine specific gravity or liquids.

  • 10

    what is voltage?

    force that causes electrons to flow.

  • 11

    A24 volt system joins two batteries wired in parallel is still a 12 volt system?

    True

  • 12

    Two or more batteries wired in series develops 24 volts though Ampherage doesn’t change?

    True

  • 13

    What is the correct tread depth for the front tires of a Gillig?

    6/32nds

  • 14

    What is the correct tread depth of the Rear tires of a Gillig?

    4/32nds

  • 15

    What is the correct tread depth for the front tires in the WINTER season according to CDTA?

    8/32nds

  • 16

    Coolant mixed with transmission fluid creates a:

    Light brown milky color

  • 17

    Transmission fluid should be dark red?

    True

  • 18

    According to NYSDOT it should not take more than _ passs for the windshield wipers to clean your windshield?

    5

  • 19

    When you grease an component, you should always _ the zerk fitting before and after greasing?

    Clean

  • 20

    When applying the service break, you should not lose more than _ psi per minute?

    3

  • 21

    When taking an oil analysis it is best to retrieve oil from the pan at the _ of the oil drain?

    middle

  • 22

    Wgat is the correct regulator setting on an odyssey batteries?

    29 volts

  • 23

    When wiring the coolant refractometer, a 50/50 mixture of concentrated coolant and water will give you a protection of?

    -34%

  • 24

    It is best to grease all grease or components before checking them for wear?

    False

  • 25

    The coolant torque on the Gillig hybrid transmission Lube-Filter cover bolts?

    18-21 ft lbs

  • 26

    What fluid filters are needed for a 24K inspection?

    Oil, Coolant, Fuel filters

  • 27

    When an automatic slack adjuster exceeds its travel, it is recommended practice to adjust it back to its correct measurement before returning bus to denser ice?

    True

  • 28

    When losing air pressure the low air dash light and buzzer will activate at:

    60 psi

  • 29

    When checking air pressure in a tire and the pressure is 70 psi or below it should be considered a flat?

    True

  • 30

    When checking the state of a fully charged battery with a hydrometer the electric current should be between:

    1.260 - 1.280

  • 31

    When is it best to record the oil pressure reading and check the transmission of the bus?

    When the transmission and engine are at operating temperature.

  • 32

    According to CDTA standards a dripping liquid such as (fuel, oil, coolant) component is classified as what number?

    1

  • 33

    When checking slack adjuster travel you should be sure to have at least _ pressure in your tanks.

    90-100 pds

  • 34

    When a battery cell is completely empty you should:

    condem the battery

  • 35

    According to CDTA standards what is the correct tire tread depth minimum for rear tires in the summer season?

    4/32nds

  • 36

    A rust trail on any metal component or frame is an indication of what?

    something is broken or cracked

  • 37

    A feathery edged wear pattern on the front tires is probably caused by?

    A wrong tow in adjustment

  • 38

    When draining all air tanks and containments such as water and oil are released is a good indication of what?

    all of the above

  • 39

    In the winter season you should add 8oz of:

    BLA Brake Line Antifreeze

  • 40

    The correct lug nut torque valve in most larger buses is?

    450-500 ft lbs.

  • 41

    how many volts does an 8D battery charge at?

    28 volts

  • 42

    A battery is 36% Acid

    True

  • 43

    A battery is 64% water?

    True

  • 44

    What makes up electricity?

    Source, Load, Ground

  • 45

    what is a Refractometer used for?

    to test coolant.

  • 46

    How many volts is a battery at full charge?

    12.6 volts

  • 47

    Protons create a positive charge:

    True

  • 48

    Electrons create a negative charge?

    True

  • 49

    A neutron is neutral:

    True