What is the acceptable percentages for a BS&W?

What color does oil turn when it has copper or tin in it?

Where are sample connections fitted?

What is the allowable passing criteria for a particle in a visual test?

When is a casualty sample drawn from a LSB?

How long must you wait to take a sample on operating equipment that you added oil to?

How fast does the centrifuge spin during a BS&W test?

How often do you sample equipment using 2000 series oil?

What equipment is used to conduct a flash point test?

LO purifier efficiency should be tested after starting and every thereafter?

What provides a standardized oil analysis testing procedure for the Navy. Army, and Air Force?

How long are LO logs kept on board?

What is the purpose of the lube oil heater?

What purification process is when you transfer oil from the sump to the settling tank?

What part of the AMCW prevents overheating of the pump?

What type of heat exchanger is used in the AMCW?

What type of pump is used in the AMCW?

What limits flow through the recirculation line?

Where does the cooling system begin?

The recirculation line is used to bypass the reducing valve (TRUE/FALSE)

At what differential pressure are Helen strainers required to be cleaned at?

What system is used as a back up to the AMCW?

What prevents the orifice from getting clogged?

At what pressure does high pressure air operate at?

What is the primary function of a dehydrafor?

What color valve is LP air?

What is the function of the priority valve?

What is used to cool compressed air between the different stages?

What is normal operating LP air Pressure?

How many HP compressors on normally on a ship?

How long is the Blow-Down valve operated on the compressor?

What is the maximum number of stages of a HP compressor?

How often are readings taken on an HPAC?

What valves are used to control or limit flow to the compressed air system?

When working on HP air system, the system should be tagged out and depressurized. (TRUE/FALSE)

What is distillate?

What PSI is needed to separate salt from seawater in the RO system?

What is the waste material that is pumped over board from the distilling process?

How often are readings taken on an HPAC?

What component maintains the filters and is vital to the performance of the RO Plant?

Which component is the central control of the RO plant?

How many flow meters are in the RO plant?

The lowest temperature at which a liquid gives off vapors that could ignite is called?

Pressure exerted on a confined liquid is transmitted in all directions, and acts with equal force on all areas, is an example of what law?

What type of actuator is used to apply linear force to a mechanism?

What is force measured in?

Laminar flow is an erratic and turbulent flow. (TRUE/FALSE)

What rating measures the ability of the element to remove the contaminants?

What valve maintains hydraulic system pressure?

What converts hydraulic energy generated by a pump back into mechanical energy?

What documentation is used to preform maintenance on the hydraulic system?

What component is used to remove large contaminants from the suction side of a hydraulic pump?

What is used to align the hydraulic system?

What fluids can be used in the hydraulic system?

What is the measurement of Fluid's resistance to flow?

What converts linear movement of the ram to radial movement of the rudderpost?

What type of pump is the HPU main pump?

How many modes of operation does a vertical package conveyor have?

How many modes of steering gear operation do DDG-51 class ships have?

What maintains the ship's heading and carries out course changes?

What component will compare the ordered and actual rudder angle indicators?

What color valve is hydraulies?

The conveyor load/unload device has how many position?

The convoy are trays that can hold_____lbs, and the overall weight of the conveyor is?

How many LBS will activate the down-over travel interlock?

What prevents conveyor doors from closing if the load/unload device is not in stowed?

How long does the warning horn sound for the conveyor?

What drum is fitted with whelps to engage the anchor chain?

What allows the wildcat to disengage from the windlass drive?

What component is used to control the raise and lowering of the anchor?

What term describes lowering the anchor?

What term describes raising the anchor?

When the wildcat lever is disengaged, what component can operate independently?

What component is used for mooring, towing, and warping operations?

What type of coupling on the anchor windlass system, allows for no misalignment?

What component will keep your anchor from free falling?

What converts high speed operations of the hydraulic system, to low speed operations of the capstan?

Who conducts oil analysis?

What mode should the heat be kept in to facilitate a quick start?

Which pump provides oil flow for the purification process?

What tank is used in the batch purification process?

What NTSM talks about grease?

Polishers are designed to remove water and solids from LO with what?

How long is LO heated in the settling tank?

Who is the primary keeper for the LOQM program?

Who ensures all WCS are trained and qualified?

What holds the purifier bowl still while preforming maintenance?

How many disks are in the purifier assembly?

What gear assembly drives the purifier?

The priming valve on the purifier creates what type of seal?

All machinery containing lubricating oil fluids must be fitted with a sample connection (TRUE/FALSE)

On the delaval purifier, what does the regulating tube direct into the rotating bowl?

What is the flow rate of the delaval purifer?

What is used to start the lurifier?

What does the purifier do?

How many times will the speed indicator plunge during normal operating speeds

How many RPMs does the purifier operate at?