暗記メーカー

暗記メーカー

​
ログイン
7.9
10問 • 11ヶ月前
  • Yousef Alshammary
    • 通報

    問題一覧

  • 1

    From control rods and rigid moving parts

    is – 18 mm (0.75 in)

  • 2

    Flexible hoses are pressure tested

    to 1.5% times the maximum working pressure. Test with the normal system fluid or paraffin.

  • 3

    Pipe a way From control rods and rigid moving parts

    is = 18 mm (0.75 in

  • 4

    Aluminum tubing with outside diameters less

    than 3/8 in [0.952 cm] must havea double flare.

  • 5

    Flareless-Tube Fittings The fitting consists of three parts;

    a body, a sleeve, and a nut

  • 6

    An example hyd. Hose press.

    100 psi

  • 7

    A small amount of flattening in bends is acceptable, but should not exceed an amount such that the small diameter of the flattened portion is

    ess than: 75% of the original outside diameter.

  • 8

    Bore Test Pass a ball through the pipe from each end in turn. The ball diameter should be

    at least 80% of the diameter of the pipe. Flow test may be specified.

  • 9

    The parts required to make up a flared-tube fitting

    are sleeve and nut.

  • 10

    Fretting corrosion on a braided pipe would mean it was

    unserviceable and should be replaced

    • mod 3 3.1 - 3.2 - 3.3

    mod 3 3.1 - 3.2 - 3.3

    Yousef Alshammary · 24問 · 12ヶ月前

    mod 3 3.1 - 3.2 - 3.3

    mod 3 3.1 - 3.2 - 3.3

    24問 • 12ヶ月前
    Yousef Alshammary

    mod 3 3.4 - 3.5 - 3.6

    mod 3 3.4 - 3.5 - 3.6

    Yousef Alshammary · 39問 · 12ヶ月前

    mod 3 3.4 - 3.5 - 3.6

    mod 3 3.4 - 3.5 - 3.6

    39問 • 12ヶ月前
    Yousef Alshammary

    mod 3 3.7 - 3.8 - 3.9

    mod 3 3.7 - 3.8 - 3.9

    Yousef Alshammary · 38問 · 11ヶ月前

    mod 3 3.7 - 3.8 - 3.9

    mod 3 3.7 - 3.8 - 3.9

    38問 • 11ヶ月前
    Yousef Alshammary

    mod 3 3.10 - 3.11 - 3.12

    mod 3 3.10 - 3.11 - 3.12

    Yousef Alshammary · 41問 · 11ヶ月前

    mod 3 3.10 - 3.11 - 3.12

    mod 3 3.10 - 3.11 - 3.12

    41問 • 11ヶ月前
    Yousef Alshammary

    mod 3 3.13 - 3.14 - 3.15

    mod 3 3.13 - 3.14 - 3.15

    Yousef Alshammary · 39問 · 11ヶ月前

    mod 3 3.13 - 3.14 - 3.15

    mod 3 3.13 - 3.14 - 3.15

    39問 • 11ヶ月前
    Yousef Alshammary

    mod 3 3.16 - 3.17 - 3.18

    mod 3 3.16 - 3.17 - 3.18

    Yousef Alshammary · 27問 · 11ヶ月前

    mod 3 3.16 - 3.17 - 3.18

    mod 3 3.16 - 3.17 - 3.18

    27問 • 11ヶ月前
    Yousef Alshammary

    mod 5 5.1 - EFIS - DAC - A429 - A629 - AND - NAND

    mod 5 5.1 - EFIS - DAC - A429 - A629 - AND - NAND

    Yousef Alshammary · 34問 · 11ヶ月前

    mod 5 5.1 - EFIS - DAC - A429 - A629 - AND - NAND

    mod 5 5.1 - EFIS - DAC - A429 - A629 - AND - NAND

    34問 • 11ヶ月前
    Yousef Alshammary

    mod 5 OR - Buses - Buf Reg - 5.10 - RL - Basic

    mod 5 OR - Buses - Buf Reg - 5.10 - RL - Basic

    Yousef Alshammary · 29問 · 11ヶ月前

    mod 5 OR - Buses - Buf Reg - 5.10 - RL - Basic

    mod 5 OR - Buses - Buf Reg - 5.10 - RL - Basic

    29問 • 11ヶ月前
    Yousef Alshammary

    mod 5 Single - multimund - optical - 5.11 - LCD - 5.12 - PCB - 5.13

    mod 5 Single - multimund - optical - 5.11 - LCD - 5.12 - PCB - 5.13

    Yousef Alshammary · 38問 · 11ヶ月前

    mod 5 Single - multimund - optical - 5.11 - LCD - 5.12 - PCB - 5.13

    mod 5 Single - multimund - optical - 5.11 - LCD - 5.12 - PCB - 5.13

    38問 • 11ヶ月前
    Yousef Alshammary

    mod 5 Safety - software - 5.14 - HIRF - HIRF EMI

    mod 5 Safety - software - 5.14 - HIRF - HIRF EMI

    Yousef Alshammary · 26問 · 11ヶ月前

    mod 5 Safety - software - 5.14 - HIRF - HIRF EMI

    mod 5 Safety - software - 5.14 - HIRF - HIRF EMI

    26問 • 11ヶ月前
    Yousef Alshammary

    mod 5 5.15

    mod 5 5.15

    Yousef Alshammary · 25問 · 11ヶ月前

    mod 5 5.15

    mod 5 5.15

    25問 • 11ヶ月前
    Yousef Alshammary

    mod 5 Numbering System

    mod 5 Numbering System

    Yousef Alshammary · 16問 · 11ヶ月前

    mod 5 Numbering System

    mod 5 Numbering System

    16問 • 11ヶ月前
    Yousef Alshammary

    7.1

    7.1

    Yousef Alshammary · 18問 · 11ヶ月前

    7.1

    7.1

    18問 • 11ヶ月前
    Yousef Alshammary

    7.2

    7.2

    Yousef Alshammary · 11問 · 11ヶ月前

    7.2

    7.2

    11問 • 11ヶ月前
    Yousef Alshammary

    7.3 - 7.4

    7.3 - 7.4

    Yousef Alshammary · 32問 · 11ヶ月前

    7.3 - 7.4

    7.3 - 7.4

    32問 • 11ヶ月前
    Yousef Alshammary

    7.5

    7.5

    Yousef Alshammary · 9問 · 11ヶ月前

    7.5

    7.5

    9問 • 11ヶ月前
    Yousef Alshammary

    7.6 - 7.8

    7.6 - 7.8

    Yousef Alshammary · 8問 · 11ヶ月前

    7.6 - 7.8

    7.6 - 7.8

    8問 • 11ヶ月前
    Yousef Alshammary

    7.10

    7.10

    Yousef Alshammary · 12問 · 11ヶ月前

    7.10

    7.10

    12問 • 11ヶ月前
    Yousef Alshammary

    7.11

    7.11

    Yousef Alshammary · 7問 · 11ヶ月前

    7.11

    7.11

    7問 • 11ヶ月前
    Yousef Alshammary

    6.3

    6.3

    Yousef Alshammary · 46問 · 11ヶ月前

    6.3

    6.3

    46問 • 11ヶ月前
    Yousef Alshammary

    問題一覧

  • 1

    From control rods and rigid moving parts

    is – 18 mm (0.75 in)

  • 2

    Flexible hoses are pressure tested

    to 1.5% times the maximum working pressure. Test with the normal system fluid or paraffin.

  • 3

    Pipe a way From control rods and rigid moving parts

    is = 18 mm (0.75 in

  • 4

    Aluminum tubing with outside diameters less

    than 3/8 in [0.952 cm] must havea double flare.

  • 5

    Flareless-Tube Fittings The fitting consists of three parts;

    a body, a sleeve, and a nut

  • 6

    An example hyd. Hose press.

    100 psi

  • 7

    A small amount of flattening in bends is acceptable, but should not exceed an amount such that the small diameter of the flattened portion is

    ess than: 75% of the original outside diameter.

  • 8

    Bore Test Pass a ball through the pipe from each end in turn. The ball diameter should be

    at least 80% of the diameter of the pipe. Flow test may be specified.

  • 9

    The parts required to make up a flared-tube fitting

    are sleeve and nut.

  • 10

    Fretting corrosion on a braided pipe would mean it was

    unserviceable and should be replaced